Jump to content
SAU Community

Recommended Posts

Part: 2x 5sp RB20DET gearboxes

Condition: Need reconditioning

Description: 1x from r31 (5th gear 3200rpm @ 100kmh)

1x from r32 (5th gear 2800rpm @ 100kmh)

Location: Morayfield, Qld, 4506

Contact Details: 0406 459 669

Asking Price: $160 ono for the both, or open for swaps for something

Pick-up/Postage Arrangements: Pick-up only as too big for postage. Ring for arrangement

Other Comments:

Hey guys! Sold my r32 a while back so I have decided to get rid of these gearboxes I had for it that are still sitting here.

1st is from an r31 as it has a higher revving 5th gear than an r32 box. It ran fine and had no problems changing into gears when I had it in the car for 2 weeks but it may need reconditioning though as the synchros were quite noisy. Was gonna rebuild it but I don't have the time or money to do so.

2nd is the original gearbox that came out of the r32. Reason I took it out was it was jumping out of 1st and 2nd occasionally and then one day wouldn't shift into any gear at all. May be selector shaft and/or baulk rings, but haven't pulled it apart to have a look. She ran smooth up until then.

With these boxes, you could find that one could fix the other and save some money. Either way I'm over them sitting here. Looking for $160 to get rid of them both.

Give me a call or sms the number above.

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/380415-qld-fs-2x-5sp-rb20det-gearboxes/
Share on other sites

  • 6 months later...


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...