Jump to content
SAU Community

Recommended Posts

So far making 270rwkw on 15psi spiking to 16. Got all supporting mods wanted to push for 18 or 20psi

Any reasons i wouldnt be able to. I.e. Afr's?

R33-rb25

Last tune by jeff speedlab, cant find himso recomendations on where to get a good tune would be good.

Cheersguys

Link to comment
https://www.sau.com.au/forums/topic/380428-basic-retune-for-more-psi270rwkw/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

What turbo you running? Is the motor built with cams etc? Thats a good power at 15psi! My car has 270rwkw with bout 21psi on a stock motor with a GTX3071 if your fuel system is up to it 20 psi is no drama!

Put it this way mate my car has 850cc injectors and tomei 276Lpm pump and my boost spiked up to 26.6psi in 3rd gear with plenty of revs and throttle and the motor didnt make a sound it shouldnt of!:thumbsup:

But obviously i wouldnt recommend it on a stock motor! But alot of blokes in here run 20psi on stockas reliably if ya motor is relatively healthy and you dont abuse it too often :whistling:

No ideaonthe turbo but according to previous owner was biggest highflow. Done by ATS

Stock internals as far as i know, no cams or camgears, fuel systemis easly up to it.

Im

Not sure whats good for that turbo but mabye look at a retune orgionaly this car made 236rwkw on 16psi from turbo tune, then jeff gave it a real tune.

SWEET! Well wind the boost up mate and put her back on the rollers! haha :banana:

Wow thats a big increase from a re tune! Good luck with it mate :thumbsup:

No ideaonthe turbo but according to previous owner was biggest highflow. Done by ATS

Stock internals as far as i know, no cams or camgears, fuel systemis easly up to it.

Im

Not sure whats good for that turbo but mabye look at a retune orgionaly this car made 236rwkw on 16psi from turbo tune, then jeff gave it a real tune.

ATS, would be GT30 internals in a factory t3 housing machined to fit. Most power you will get out of it is 270-280kw before its out of its range and starts surging or going hyper (aka, spinning n making more boost with no power increase, much like a non actuated turbo) The factory front housing doesnt like boost over 18psi, have seen em crack before but then again have seen em running on 20+ with no problem. Either way i wouldnt push it, if its still healthy, get rid of it and upgrade to something that will handle the power you want with ease.

my 2c

18psi from an ATS highflow would just be starting to reach the happy zone. I have an ATS "highflow" of sorts, with a GT3076R ball bearing internal wastegate core - front is a stock compressor cover ported out to the extreme, rear exhaust housing is a .73ar AVO unit for the 6-bolt skyline style.

Bill Keen from ATS builds his turbos to take up to around 22psi comfortably, 18psi would be nice and sweet for an unopened motor.

Make sure your fueling is ok, same with cooling. But with 270rwkw currently Id say that probably isnt an issue. At 18psi you could expect 280rwkw, at 20psi perhaps up to 300rwkw.

I use and recommend Bootworx, however Willal Racing is a SAU:SA club sponsor and Martin Donnan would have to be the best tuner in the state.

sorry to burst your kw bubble but i would almost certainly put money on it that 270kw was a happy dyno

Bill rates that high flow to 270,

first thing first go see Martin at >>Willall Racing<< and get a power run and advice on if he can improve the tune or extract more boost

sorry to burst your kw bubble but i would almost certainly put money on it that 270kw was a happy dyno

Bill rates that high flow to 270,

first thing first go see Martin at >>Willall Racing<< and get a power run and advice on if he can improve the tune or extract more boost

Hey I'm with you

rb25 15psi for 270 is high

Run it on the mainline dyno @ Willal for a more realistic readout

As Steve said. Best thing to do would be to take it to Willall. Get them to do a power run and then look into getting more boost, better tune and see what it spits out. 270rwkw on 15psi would certainly not be coming out of a highflow.

Cheers for the imput guys. Il give willall racing a ring next few days n see how much it is.

Yea even i figured it was a bit much non the less put a massive smile on my face on boost ;)

Just a quick thing the highflow was 2700. Wouldnt it have been better to just get a 3076r or something? I know for the whole stock look its good but this thing is clearly defectable catch can, bov all that crap

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...