Jump to content
SAU Community

Recommended Posts

hey guys

most of you that have upgraded wouldn't wish stock gts brakes on your worst enemies

but i want some, for my 31

the wheels i have won't clear 4 pot brakes so im chasing something with a sliding caliper

let me know what you have and how much

Cheers, Tom

Link to comment
https://www.sau.com.au/forums/topic/380628-wtb-cheap-non-turbo-brakes/
Share on other sites

ive got a full set of stagea brakes. twin pot fronts single rear. with pads and rotors. u can have the hole lot for a 6pack of strongbows

s1 or s2? i tried to put my old s2 fronts on but the mounting holes are hardened so can't be drilled

hi mate, ive got a full set of r34 na brakes with pads and rotors you can have cheap, let me know if your interested

same as above, your 34 ones won't bolt on because they use 14mm bolts and i already tried to drill them out but they are hard as!!!

running import/gts front struts so probably no go on that one too :(

can't be 4 pots either (any future posters) because they won't clear under my watanabes pinch.gif

ok well i have some 2 piston slide type calipers ive just talkin off my infinti in favour of 4 pots. throw me an offer via pm or text 0401396905 if you want :) have rotors and pads. rotors are in poor shape from sitting around for now 8 years.... lol but they can come with or go in my bin your choice. all located on gold coast.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...