Jump to content
SAU Community

Recommended Posts

Hi guys,

A mate of mine's looking to get some rims for his 34 GTT, no rolled guards, and what appears to be stock (or semi-stock) suspension.

We fitted my LM-GT3's (18x9 +26) on front and rear to see how they look/fit, and are thinking they're probably a bit wide, so the idea was this:

What rims are you running on your 34 GTT? If you could copy/paste this bit and reply, would be MUCH appreciated.

Rim Brand/style:

Size:

Offset:

Tyre brand/size:

Guards rolled y/n:

Suspension:

General comments:

Thanks heaps guys!

(some pics to see how they don't fit quite right)

B5QJU.jpg

DV73z.jpg

Edited by cpd
Link to comment
https://www.sau.com.au/forums/topic/381156-r34-gtt-owners-what-rims-do-you-run/
Share on other sites

Rim Brand/style: Rays TE37's

Size: 18x9.5

Offset:+22

Tyre brand/size:Kumho KU31 265/35/18

Guards rolled y/n: Y

Suspension: Cusco Zero2E

General comments: sits pretty flush with guards rolled, would've gone +12 on the rears though

Rim Brand/style: Koya/Drift Teks

Size:18x8.5 (f) 18x9.5®

Offset:+34 all round

Tyre brand/size:225/40R18 (f) - 235/40R18 ® marshal tires(never heard of em but they go ok)

Guards rolled y/n:Not yet (need to gonna do it tomorrow after work)

Suspension:BC BR coilovers

General comments: once i roll up the guards a bit tomorrow the fronts will be ok (not too worried about from tires atm since i needa replace them, have hit the front left with the guard and cut into the tire)

other than that i need to put the rear tires on the front and get some 255's or around there for the rears cause atm they are pretty stretched as that came off a s13. but im pretty happy with the fitment

  • 3 weeks later...

Hey guys I am new member from Thailand, great to join y all!

I just got er34 nismo version two weeks ago & my rim is

Te 37 mono block

rim 19 front 9.5 rear 10.5 of +12 off set

but do not fit yet, I will respray the body first, will take photo later again

Thanks y all

Understeer Drift NA

Hey guys I am new member from Thailand, great to join y all!

I just got er34 nismo version two weeks ago & my rim is

Te 37 mono block

rim 19 front 9.5 rear 10.5 of +12 off set

but do not fit yet, I will respray the body first, will take photo later again

Thanks y all

Understeer Drift NA

La bomba?

I have a R34 GT-T and am looking at purchasing some rims/tyres. I was wondering if I could get some feedback on what would sit flush to my guards.

I was considering 18 x 8.5 with + 35 fronts, and 18 x 9.5 with + 40 rears. Would this give me the flush look I desire?

Any help is appreciated.

Cheers Brandon.

I have a R34 GT-T and am looking at purchasing some rims/tyres. I was wondering if I could get some feedback on what would sit flush to my guards.

I was considering 18 x 8.5 with + 35 fronts, and 18 x 9.5 with + 40 rears. Would this give me the flush look I desire?

Any help is appreciated.

Cheers Brandon.

I'm no expert, and am actually looking for some advice myself. From what I have gathered through painful searching and reading, +40 offset on the rear is a bit too high - better off with +35 or so. Unsure if that is with or without guard work. I encourage fellow GT-T owners to elaborate.....:mellow:

depends how low you are going to have the car, how much camber, and how big tires (stretch, mega stretch, no stretch) etc.

my rears 18x9.5 +20 with 235 tires sit pretty flush with the guards with maybe like -0.5 to -1 degree of camber, sitting at a height of about 1 fingers gap between guard and tire.

exact same specs on the fronts, they stick out a fair bit. but looks good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...