Jump to content
SAU Community

Recommended Posts

Hi guys,

A mate of mine's looking to get some rims for his 34 GTT, no rolled guards, and what appears to be stock (or semi-stock) suspension.

We fitted my LM-GT3's (18x9 +26) on front and rear to see how they look/fit, and are thinking they're probably a bit wide, so the idea was this:

What rims are you running on your 34 GTT? If you could copy/paste this bit and reply, would be MUCH appreciated.

Rim Brand/style:

Size:

Offset:

Tyre brand/size:

Guards rolled y/n:

Suspension:

General comments:

Thanks heaps guys!

(some pics to see how they don't fit quite right)

B5QJU.jpg

DV73z.jpg

Edited by cpd
Link to comment
https://www.sau.com.au/forums/topic/381156-r34-gtt-owners-what-rims-do-you-run/
Share on other sites

Rim Brand/style: Rays TE37's

Size: 18x9.5

Offset:+22

Tyre brand/size:Kumho KU31 265/35/18

Guards rolled y/n: Y

Suspension: Cusco Zero2E

General comments: sits pretty flush with guards rolled, would've gone +12 on the rears though

Rim Brand/style: Koya/Drift Teks

Size:18x8.5 (f) 18x9.5®

Offset:+34 all round

Tyre brand/size:225/40R18 (f) - 235/40R18 ® marshal tires(never heard of em but they go ok)

Guards rolled y/n:Not yet (need to gonna do it tomorrow after work)

Suspension:BC BR coilovers

General comments: once i roll up the guards a bit tomorrow the fronts will be ok (not too worried about from tires atm since i needa replace them, have hit the front left with the guard and cut into the tire)

other than that i need to put the rear tires on the front and get some 255's or around there for the rears cause atm they are pretty stretched as that came off a s13. but im pretty happy with the fitment

  • 3 weeks later...

Hey guys I am new member from Thailand, great to join y all!

I just got er34 nismo version two weeks ago & my rim is

Te 37 mono block

rim 19 front 9.5 rear 10.5 of +12 off set

but do not fit yet, I will respray the body first, will take photo later again

Thanks y all

Understeer Drift NA

Hey guys I am new member from Thailand, great to join y all!

I just got er34 nismo version two weeks ago & my rim is

Te 37 mono block

rim 19 front 9.5 rear 10.5 of +12 off set

but do not fit yet, I will respray the body first, will take photo later again

Thanks y all

Understeer Drift NA

La bomba?

I have a R34 GT-T and am looking at purchasing some rims/tyres. I was wondering if I could get some feedback on what would sit flush to my guards.

I was considering 18 x 8.5 with + 35 fronts, and 18 x 9.5 with + 40 rears. Would this give me the flush look I desire?

Any help is appreciated.

Cheers Brandon.

I have a R34 GT-T and am looking at purchasing some rims/tyres. I was wondering if I could get some feedback on what would sit flush to my guards.

I was considering 18 x 8.5 with + 35 fronts, and 18 x 9.5 with + 40 rears. Would this give me the flush look I desire?

Any help is appreciated.

Cheers Brandon.

I'm no expert, and am actually looking for some advice myself. From what I have gathered through painful searching and reading, +40 offset on the rear is a bit too high - better off with +35 or so. Unsure if that is with or without guard work. I encourage fellow GT-T owners to elaborate.....:mellow:

depends how low you are going to have the car, how much camber, and how big tires (stretch, mega stretch, no stretch) etc.

my rears 18x9.5 +20 with 235 tires sit pretty flush with the guards with maybe like -0.5 to -1 degree of camber, sitting at a height of about 1 fingers gap between guard and tire.

exact same specs on the fronts, they stick out a fair bit. but looks good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...