Jump to content
SAU Community

Recommended Posts

]WHITE R32 GTS-T

ALL PARTS FOR SALE IF NOT LISTED JUST ASK

FRONT STRUT BRACE $50

DRIVERSIDE GUARD $100

COMPLETE DOORS $100 EACH

WINDSCREEN $50

DOOR MIRRORS $50 EACH

TYPE M SPOLIER $50

REAR PODS $100

SEATS $150

DOOR TRIMS $25 EACH FEW MARKS

FRONT & REAR BRAKES $500

TAILIGHTS $50 EACH

REAR BAR $75

REO BAR $75

REAR REVERSE LIGHTS $50 EACH

TAILSHARFT $100

MANUAL PEDDALS $100

BARE SHELL REGO ABLE $600

post-51589-0-48788400-1320317894_thumb.jpg

post-51589-0-70407800-1320317901_thumb.jpg

post-51589-0-04664300-1320317931_thumb.jpg

post-51589-0-57842000-1320317941_thumb.jpg

R32 GTR GENUWINE 69,000K'S

PASSENGER SIDE GUARD $300

COMPLETE DOORS $100 EACH

MOMO RACE WHEEL & BOSS $150

DOOR MIRRORS $50 EACH

GTR WHEELS $800 NEW TYRES

GTR SPOILER $100 OR $150 WITH BOOT

REAR REVERSE LIGHTS $50 EACH

TAIL LIGHTS $50 EACH

REAR REO BAR $100

IGNITION BARREL AND DOOR LOCKS $150

SEAT BELTS $25 EACH

RB26DETT APEXI POWER FC $1100 WITH HAND CONTROLLER

GTR GAUGES $100

NISMO GTR CLUSTER 320KPH $500

APEXI COIL OVERS $900

NISMO STRUT BRACE $150

APEXI PODS $200

REAR SWAY BAR $150 WITH ALL BRACKETS

COMPLETE REAR CRADLE

DIFF, DRIVE SHARFTS BRAKES $600

OIL COOLER & RELOCATOR $500 (NEEDS ONE FITTING)

FRONT BRAKES $300

HKS TOP INTERCOOLER PIPES $200

REAR GTR SEAT TOP IS FADED $125

BARE GTR SHELL AND CAN BE REGISTERED $1000

post-51589-0-15978500-1320317958_thumb.jpg

post-51589-0-80998100-1320317965_thumb.jpg

post-51589-0-93595100-1320317973_thumb.jpg

post-51589-0-76138000-1320317983_thumb.jpg

post-51589-0-36723800-1320317991_thumb.jpg

post-51589-0-82119500-1320318005_thumb.jpg

post-51589-0-02237500-1320318013_thumb.jpg

post-51589-0-77140400-1320318019_thumb.jpg

post-51589-0-67545700-1320318033_thumb.jpg

post-51589-0-36922500-1320318042_thumb.jpg

post-51589-0-17211100-1320318050_thumb.jpg

RB26DETT MOTOR AND LOOM $3000

IN THE ACCIDENT THE ALTERNATOR WAS SNAPPED OFF THE MOTOR

SO THERE IS A SMALL HOLE IN THE BLOCK

YOU HAVE TO WELD IT BACK ON WHICH WILL COST $100-$200

SEE PICTURES 69.000K'S ALSO NEEDS A WATER PUMP.

post-51589-0-96314900-1320318068_thumb.jpg

post-51589-0-21303700-1320318074_thumb.jpg

CALL/TXT LUKE 0431 391 262

TXT IS BEST ON WEEKDAYS AS IM ALWAYS ON THE PHONE AT WORK

WILL POST MOST PARTS AT BUYERS COST.

Edited by skyline_r33_panda
Link to comment
https://www.sau.com.au/forums/topic/382015-sa-wrecking-r32-gtr-and-gtst/
Share on other sites

Hi,

after the following if in good comdition;

dash centre vents, window demist vents, clips that hold sill garnish, clips/screws for ecu and kick panels, internal door handles if in vgood condition, and cover over door handle bolt (on inside of door trim - passanger side) and the clips that hold the garnish down under the window wipers

Also after the plastic bits that sit inside the door and cover mirror bolts (triangle) and the metal plate that separates the rear seat to boot and boot trim

Probably a bit tricky posting some of that to Perth (wa) but what ever you have and willing to send over - please let me know

Cheers

Ps: also after the clock if it's working :)

Edited by Steve
  • 2 months later...

Hi if you still have the gtst i'm after the power steering line that goes from the pump, under the engine on the front of the crossmember then connects to the lower of the big banjo bolts of the front of the steering rack, it also has a sensor in the middle of it (I can provide pics if needed).

And would you be willing to post it to Wagga (2650) ?

Cheers

Vince

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...