Jump to content
SAU Community

Recommended Posts

Hehe it feels like a need a lighter flywheel :rant:

In mine, third and fourth are the best gears - it only really starts to boogie once the needle is past 100km/h, and over 160km/h it really shines. Fifth is a bit tall for good acceleration until you start making serious power, but it'll still pull the needle all the way around until it hits the fuel gauge, great for novelty points :wassup:

Only problem is that you can only really use it to its best on the track. Second is still good fun (and great for blowing away ricers) but out on the track is where it comes into its own.

Well my bike indicates 134km/h on the rev limiter in first gear, which is half way between second and third in the line, and with a bad launch (~2.1 60') that'll be over in around 5 seconds. Half track at the drags in 7.4 at just over 105mph (~169km/h), which would be the top of third gear in the line, so you'd need to change gears three times (into fourth) in that 7½ seconds. You'd be in first for about 1½ sec of that given the crap launch, in second for maybe 2½ sec, and third would be the other 3½ seconds. A proper launch would easily wipe a few tenths off that. So if you can imagine having to change gears that quickly, control the throttle and the clutch, and keep it off the walls, you've got a fair idea. The bike is quicker at half track than the car is at full track :rant:

It's a pretty cool feeling crossing the 400m mark at well over 200km/h :) I need to scab a ride on a GSXR1000 or something, now THAT would be exciting down the strip...

Running the bike has actually given me better car control - the Skyline is much slower, so there's more time to think. What I mean is, I know what 170km/h in under 7.5 sec feels like, so doing less than 130km/h in 9.5 sec is much easier.

Not trying to sound like a tool, just trying (badly) to explain it :)

I cant even begin to imagine what it would be like in a 10/11sec car

It gets hard when you're only JUST scraping the upper limit of the higher number there, Ben :rant: That said, it gets MUCH better the more you do it :))))

Adrian

Hey Guys. What does it feel like when you plant your foot in 1st gear? What are its most powerful gears? (in a Skyline)

A stockish answer to your question:

1st gear is good to get some whiplash happening but it usually ends in wheel spin when pushed even a fraction too hard. 2nd is where the fun begins, putting you back in your seat and preparing for 3rd. Once you hit 3rd watching the needle shoot from 100 to 150 odd is awesome! Past that, 4th slows down a bit but still pulls hard beyond what can be read off the stock speedo.... then you know you're moving :P

The most powerful gear is 1st hence the ease of wheelspin. I feel the power most in 2nd then 3rd. 2nd is my fav gear, esp thru the twisties :(

What car were you comparing to?

my best gear is 1st gear heaps of power then 2nd and 3rd.

hey for a qtr mile time i got a 13.58 with pfc, exhaust, fmic, 12psi boost. I had 2 12'' subs as well. Does that sound right?

my mate got a 14.00 sec with standard ecu, exhaust, 10psi boost and no subs.

what u guys reckon?

my best gear is 1st gear heaps of power then 2nd and 3rd.

hey for a qtr mile time i got a 13.58 with pfc, exhaust, fmic, 12psi boost. I had 2 12'' subs as well. Does that sound right?

my mate got a 14.00 sec with standard ecu, exhaust, 10psi boost and no subs.

what u guys reckon?

Sounds about average dude. The trick is the launch, not that Im a master at it but the more you do it the better you get at it.

I lurve 1-2-3 gears

1st - waste of time

2nd - fun for scaring the everyday commuters (fishtailing always gets their attention)

3rd - can be interesting on cold tyres. Good for instant overtaking power on warm tyres.

4th - overtaking at high speed and cruising at medium speeds.

5th - high speed cruising and the track.

The above really depends on the tyre temps. When the Nittos aren't warm it's wheelspin city.

Would be up around 200 at a guess. Easiest way is to go halfway up the tacho, then double the speedo. Eg if it cuts out at 8000, go to 4k and read the speedo. If it shows say 98km/h, double that. That'd be your 'indicated' speed anyway, as for how fast you're really going, well who really knows, but as an indication, at 110 on the speedo my PFC shows 106.

my best gear is 1st gear heaps of power then 2nd and 3rd.

hey for a qtr mile time i got a 13.58 with pfc, exhaust, fmic, 12psi boost.  I had 2 12'' subs as well.   Does that sound right?

my mate got a 14.00 sec with standard ecu, exhaust, 10psi boost and no subs.

what u guys reckon?

With those mods I would be expecting a little more. Just got my 33 GTR from compliance about 4 weeks ago, took it to Willowbank completely stock (except for BBS rims and Yoko 265 tyres and APEXi BOVs) and ran a 13.467, although the clutch was fairly average by the 8th run. I have a friend with a 33 GTR also, with similar mods to you, and although he hasn't taken it down the quater he is definately quicker than me, by a fair margin.

Will definitely be posting dyno charts when they're done.

I was using 75hp jets for the 11.9.

Adrian

I reckon go for 10's on the standard turbo mate. Just have some spare cash for an engine rebuild ready when you up the shot.

What fuel and nitrous jet sizes are you using for the 75 shot?

Yeh i know thats what i thought. Im removing the subs this weekend and gona give it another shot. The problem i think is when i up the boost to 15psi, there is a big lag between gear change and spool up. any suggestions? When i lower boost say 12psi its quick? Very strangle and will need to get it looked at.

With those mods I would be expecting a little more.  Just got my 33 GTR from compliance about 4 weeks ago, took it to Willowbank completely stock (except for BBS rims and Yoko 265 tyres and APEXi BOVs) and ran a 13.467, although the clutch was fairly average by the 8th run.  I have a friend with a 33 GTR also, with similar mods to you, and although he hasn't taken it down the quater he is definately quicker than me, by a fair margin.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...