Jump to content
SAU Community

Recommended Posts

Hi All,

Need your help here.

Monday night My computer went *pop* and no power what so ever. So first things first new power supply! went all out and got a corsais HX750 for just under $200 at MSY. (However a different company originally

Lastnight spent a considerable amount of time wiring the whole thing up with the new PSU and still..... nothing (actually got a small yellow and red light from the card reader) but thats it, no boot up nothing.

Went back to MSY today, they replaced the PSU thinking it was faulty no probs, but the guy said i am best going to the store where i got it from before going any further as he does not want to make a mess of things.

So have now gone to the store i bought the PC from, MOST OF THE PARTS ARE 11 MONTHS OLD, still have receipts etc. All parts have a 12 month warranty on them so i am all good there.

Now this is where i need your help. They have Charged me $50 to change the PSU (yep no probs) surprise surprise still no power so then I am told they think its the motherboard, "great" i say it is under warranty so change it over. I then get told before they do that they MUST run a diagnostic check to confirm that and it will cost $100.

I have now questioned.... IF.... it is the motherboard, and it is under warranty will i still be charged the $100? "yes" they replied as they still spent time diagnosing the issue, i am debating though weather or not i should be charged as they have supplied the faulty equipment under warranty. If its found to be the motherboard causing a short should i have to pay for any diagnostics?

I would like to know your thoughts and if there are any consumer "facts" that i could use.

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/
Share on other sites

Hmm, it's a hard one... I used to work at a computer store and I could understand a labour charge for testing of parts, but there's a matter of good-will involved there too.

Best bet? Department of Fair Trading, just give them a call tomorrow and tell them a *little* about the story; you've checked some other parts and believe it to be this part, but to diagnose and say 100% it's that, and that it'll be swapped under warranty, they want $100. See what they say?

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6102764
Share on other sites

OK, called fair trading and a case file has been started. They beleive if the part is under warranty then labour should not be charged.

They are sending a letter for me to complete and they can further investigations on this.

Since then the diagnostics report (which they charge $95 mind you) has confirmed it is the motherboard, so they said they can send the motherboard back to the supplier which could take up to 3 months to get it back, and when i do they then need to charge labour to replace the motherboard and sort out the parts etc At this time i am thinking this is getting pretty far fetched and they really have me bent over!

Spoke to the supervisor (as the original employee had only been there for 7 days and had no idea) and he said, regardless of the situation we will not charge over $200 in labour, so a small win there, however according to what fair trading said no labour should be charged what so ever.

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6103618
Share on other sites

3 months WHAT THE f**k

admittedly i'm still waiting on a video card back; the distributor has had it for 2 weeks now, beginning to get unhappy. 200/h labour? seriously dude that's raepage there. we'd charge $89 TOPS. and they can't charge you shit to put it back in if it's a warranted fault. or you could put it back in yourself mebbe?

if they're that shifty... make sure you get the right cpu/ram back, too.

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6103773
Share on other sites

Have spoken to the store manager this afternoon with a MINOR breakthrough.

Basically he has knocked $50 off labour.

So $50 for the install of the power supply (Yes i do know how to install this, however in light of the problems if i install it i KNOW they will turn around and blame it on me)

$95 for the diagnostic test to confirm it was the motherboard.

He said they will leave it at that. Whilst its a sign in the right direction i dont feel the diagnostic check should be charged as the result was the faulty motherboard, the $50 on the PSU though is entirely my wish which i am happy to pay for.

so it looks like free labour except for the diagnostic check...

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6103862
Share on other sites

Ah yes ive been down this road many times and This is why I spend the extra few $ it cost me to order through my mates store as he knows my background in IT and that I can confirm a fault and if something fails I just ring him up and he will have a new component drop shipped to me strait away and I just send the faulty one back to the wholesaler for RMA

I would position to the store that you will not pay a diagnosis fee upfront and will pay if not faulty as the reason they charge it is if it is returned for RMA and has no fault the store will be charged the fee by the manufacturer

If you are having them disassemble and reassemble they can charge labour for that but not for them to test and if they want to test before sending it back it is at there own cost

I've had stores when I've taken in a faulty graphics card say they need my whole computer to test before they can send it back and that I would need to pay a diagnosis fee for the testing and that when it came back they would need to install it or it would not be covered and would need to put a seal on my case and if it was broken and I had another fault i would need to pay another diagnosis fee to confirm the fault and would not budge on it but I did get them to change there minds quickly when I had one of the EVGA reps for Australia give them a call

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6103963
Share on other sites

Did you buy a complete PC from them or did you just purchase a shopping list of parts? If its the latter i guess it makes it a bit greyer.

Assuming you purchased a complete PC i wouldnt think you should have to pay a cent - it takes a few minutes to replace a PSU in most cases so not sure why you got charged that or a diagnostic fee. Then again there are plenty of dodgy operators out there.

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6105301
Share on other sites

  • 5 months later...

Thread revival!

Just wanted to update you guys, incase you havent read.

Basically my parts went POP! and they were under warranty. PSU and motherboard went. The store i got them from were they were under warranty would not exchange them instead they wanted to run a "diagnostic report" for $95. Of course i thought that dont sound right otherwise they could charge $500 if they want and make money out of parts that should be under warranty.

Well good news is consumer affairs feel the same way, they called them and told them that "it's not on!" so i got a phone call from the manager of the store who i dealt with twice and even advised him its not correct and that i was going to consumer affairs. the convo went like this:

manager: Hello Daniel

Me: Hello

Manager: yes its Jason from XXXX here i have received a call and i wasnt aware of the full situation. You see the man who was looking after it went on holidays not realising it was under warranty.

Me: So Jason, both our conversations that we had where i specifically explained to you the situation meant nothing?

Manager: Oh, i got confused.

Me: OK well how can i help you.,

Manager: Well i can give you a $95 credit.

Me: Absolutely not, please hold whilst i call back consumer affairs and I discuss this further with them

Manager: Oh, ahhh before you do would a refund be better?

Me: As advised by consumer affairs that is what you have been requested to do.

Manager: ok give me your details and i will organise refund.

Details given.

A win for the little guy!

The dissapointing thing is though, that even till the end he wanted to get out of paying me, even when advised to. instead he went the credit route. I guess being a manager myself I cant blame him for thinking of the business but i could never do the dodgy on a customer who has bought over $6000 worth of items from me.

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6335825
Share on other sites

Nice work, it is great to hear about people stand up for there rights like this. It isn't just about what you get out of it but hopefully it makes them think twice about doing it again. So thanks for following it through on behalf of all customers everywhere. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6335843
Share on other sites

wasnt MSY,but quite a big pc store here in WA which i always recommended but obviously wont now. from what i can tell they are only WA based.

Mods - is it ok if i say the name? otherwise gang feel free to PM, dont want "Prank" getting in the sh*t,

have gone over 10 years without a warning and dont feel like one now :-)

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6337426
Share on other sites

wasnt MSY,but quite a big pc store here in WA which i always recommended but obviously wont now. from what i can tell they are only WA based.

Mods - is it ok if i say the name? otherwise gang feel free to PM, dont want "Prank" getting in the sh*t,

have gone over 10 years without a warning and dont feel like one now :-)

What I meant was MSY was fined over $200,000 by the ACCC which should put other 'manufacturer only' warranty shenanigans to rest.

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6337820
Share on other sites

  • 2 months later...

Thread revival!

Well if you have bothered to read my journey thought this thread basically consumer protection stood up for me from a well known oc store here in WA. Basically I told them what was wrong and the parts were under warranty but they wanted to charge me to confirm the parts that were under warranty were faulty which basically under certain circumstances breached consumer law.

Well sad to say but 7 months later AND still under warranty my motherboard has blown and.... Well..... Exact same experience.

-My motherboard has blown which is still in its 12 month warranty period.

-Leave it with us we need to run a diagnostic check which costs 65.

-I have already run diagnostics checks., you can turn it on now if you like and it won't even show the bios screen

- we will see this as part of the diagnostic check

- no problems, but I assume if I am correct that the part under warranty if it has failed then I won't be charged

-no

- ok, is Jason the store manager in as I encountered this situation 6 months ago and consumer affairs had to get involved which ended up with your store refunding me on the exact same issue. Your store rebuilt this 6 months ago and should also have labour warranty

- look if your not going to pay for this then we are not going to fix it

I then recalled Consumer protection telling me the first time to pay for it and they will call them to organise refund.

Sorry about the long post, I need to vent. It's just so dissapointing that even 6 - 7 months on nothing has changed.

Link to comment
https://www.sau.com.au/forums/topic/382557-your-thoughts/#findComment-6447730
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...