Jump to content
SAU Community

Recommended Posts

i have a skyline r33 gts - t. The car was stolen and the compliance plates where pinched. They took all three of them so it has none. Vic roads says i can't get them replaced. . Another issue is that the car has had a new motor put in in it. ( still an RB25det) . So the engine numbers don't match either. This would not be a huge problem however i let the car become unregistered and now i want to re -register it. I notified the police and vic roads when it was stolen i told them the compliance plates where missing. have i got any chance of registering this car . thanks any help would be great.

Link to comment
https://www.sau.com.au/forums/topic/382752-fixing-my-compliance-issues/
Share on other sites

I Don't know about vic, but in sa you gotta get an ID check and they check engine number and VIN. if the engine number doesn't match what they have on their system you gotta get a full inspection. You will have to get this anyway since you now no longer have compliance plates. I doubt having the different engine will matter since it is still an rb25. But yeah you will have to get an exemption from having compliance plates.

hope this helps

i have a skyline r33 gts - t. The car was stolen and the compliance plates where pinched. They took all three of them so it has none. Vic roads says i can't get them replaced. . Another issue is that the car has had a new motor put in in it. ( still an RB25det) . So the engine numbers don't match either. This would not be a huge problem however i let the car become unregistered and now i want to re -register it. I notified the police and vic roads when it was stolen i told them the compliance plates where missing. have i got any chance of registering this car . thanks any help would be great.

Dude you have no chance. None.

so you own a car with no id and want to register it?

not to be a downer here but whats to say you didnt buy a car directly from japan and try to dodge compliance.

no id = no rego. make a track car out of it :)

yeah the police might have it on their records that the compliance plates where stolen . they know i did have a white skyline coupe registered. can't they just look it up under my name and see that it is the same car. i'm desperate i know !

Hi.

If the car has previously been registered and regardless of no plates it should still have the vin number stamped into the firewall. If so the registration people have a record of the car.You should be able to sort out registration if this is the case.

That is why you see cars listed as a statutory write off, with not a single scratch... Apart from that, one of the most knowledgeable importers on here has answered, and you appear to know that he is correct.. face the facts, if the car was insured it should have been written off, pay your premium, get your money, and move on

really?????are we aware that if a vehicle is registered in someones name then it gets re-registered without a vic roads sighting??????just rwc and paperwork as they have you on file as the previuos owner.....there is no one that knows everything.....i just done mine with no sighting...... after 6 years i might add

  • 4 weeks later...

I've just been through the exact same thing in Sa, I was able to get the car re registered with an exemption of compliance plate form from transport SA.

I was issued with a brand new vin number attached to a police report if I have any problems. I did have to fight very hard to get this and the compliance plates where removed by police SA becauses they thought it was a stolen vehicle.

So in SA it is possible, just by filling in a form and going from there.

Iron Chef, is it due to the engine swap that he has no chance? I would find it hard to believe that any car that has the compliance plates stolen, simply becomes a write off.

Would he be able to get the car checked by an engineer, signed off and then given new vin/chassis numbers etc? How do people build up hot rods from a mixture of parts and get them registered?

Australian laws are messed up even more than I thought if there really is no way to get this car back on the road, even if it costs an arm and a leg.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...