Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

Here are my last steps to got my car ready =)

This was at the end of June

2012-06-21004003.jpg

2012-06-21004048.jpg

2012-06-21004138.jpg

Later I picked up the car to Aalen (about 100km) by a trailer. Jonne from Sky-Engineering visited us to map mine and some other cars at High Import Performance in Aalen.

2012-06-21113339.jpg

2012-06-21155023.jpg

At first Jonne mapped the car on the road and after that on the AWD-Dyno

2012-06-22123335.jpg

Here is the result and a little video (@1.35bar) the car couldn`t hold the boost...

Dyno550hp650nm001.jpg

The biggest problem now, the synchro of my 3rd gear is damaged =( And this after my big rebuild of 2 years...

Anyway... I was happy to get my car home =)

Arrived home, I got some new nice stuff for the GTR from Bene (Japo-Motorsport)

Stoptech brake kit with 355mm discs front and rear and 18" Nismo GT4 wheels with Toyo R888 tires for track use =)

2012-07-05234554.jpg

2012-07-06081608.jpg

2012-07-06044530.jpg

2012-07-06050219.jpg

2012-07-06050333.jpg

2012-07-06200942.jpg

2012-07-06200930.jpg

Here my two setups:

Nismo LM GT4 in 18x9.5+15 with 265/35 R18 Toyo R888 Tires for track use

and

Varrstoen S2.2 in 19x10.5+12 with 275/30 Kumho Tires for street use

2012-07-06072921.jpg

2012-07-06073008.jpg

2012-07-06081210.jpg

2012-07-06081307.jpg

Here a little repair

2012-07-06143737.jpg

2012-07-06143751.jpg

At last, here my first shooting session at home =)

DSCF1561.jpg

DSCF1560.jpg

DSCF1556.jpg

DSCF1554.jpg

DSCF1553.jpg

DSCF1545.jpg

DSCF1541.jpg

DSCF1535.jpg

DSCF1529.jpg

DSCF1520.jpg

Now, a really big thx to Uwe, Daniel and Benny from High Import Performance (H.I.P.) for this really nice work!! Thanks to Jonne and Wayne from Sky-Engineering for the mapping. I also have to thank you to Marco, Marc, Dino and Bene (Japo-Motorsport) for your help!!

So, next things to do:

- repair the getrag (service at all synchros)

- put on the aero catch to the carbon bonnet

- ...

- ...

- ...

  • 4 weeks later...

Here you can see my last video from Reisbrennen 2012, onboard where you can see how I slide on my own lost cooling water

and here a nice video with a friend and his Evo6 TME together

  • 2 weeks later...

Here the best pics of PixelRev ( http://www.pixelrev.de/ )

2012_PixelRev_Reisbrennen_IMG_0054_1600.jpg

2012_PixelRev_Reisbrennen_IMG_0151_1600.jpg

2012_PixelRev_Reisbrennen_IMG_0157_2_logo_1600.jpg

2012_PixelRev_Reisbrennen_IMG_0195_1600.jpg

DSC_0330.jpg

DSC_0331.jpg

DSC_0340.jpg

DSC_03492.jpg

DSC_0349-2.jpg

DSC_0359-2.jpg

DSC_0365.jpg

DSC_0369-2.jpg

DSC_0374-2.jpg

DSC_0377-2.jpg

DSC_0379-2.jpg

DSC_0389-2.jpg

DSC_0395.jpg

DSC_0403.jpg

DSC_0429-2.jpg

No other news until yet.

Okay, one thing. I want to change the Tein suspension. My Tein Typ RA is really to hard!!! Impossible to drive in city or Autobahn...

Maybe the suspension is good for track, but I want to have a lil bit daily use too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...