Jump to content
SAU Community

Recommended Posts

Hi guys I need some advice here,

I have noticed when I enter corners at high speeds the rear suspension tends to not cope with the balance as I would like it to. It's a bit soft...

I would like to keep the comfortable drive but to improve this problem are coil overs my only option or would sway bars fix it?

Opinions would be appreciated:)

Link to comment
https://www.sau.com.au/forums/topic/383596-handling-and-suspension/
Share on other sites

Hi guys I need some advice here,

I have noticed when I enter corners at high speeds the rear suspension tends to not cope with the balance as I would like it to. It's a bit soft...

I would like to keep the comfortable drive but to improve this problem are coil overs my only option or would sway bars fix it?

Opinions would be appreciated:)

Do the sway bars first. That will make a huge difference to the handling, be easy to install yourself & relatively cheap (even if paying someone to do the work). Check with Dale (Daleo) on here who supplies Whiteline swaybars at a good price delivered to your door. There should be a thread from not too long ago.

Coil overs will also help but you risk losing a little of your comfortable ride (unless you buy correctly), cost a lot more & are more difficult/costly to install. Of course they provide other benefits like lower ride heights...

Cheers, Leon.

Edit: I found his group buy link here http://www.skylinesaustralia.com/forums/topic/363819-v35-whiteline-sway-bar-group-buy/page__view__findpost__p__5805363. Just check as he may be able do them individually now.

Edited by Commsman

do these skylines have the traction issues that 350z are known to have??

I looked into working the engine in one of these or the 350 (probably turbo) but found with the 350 at least lots of people have traction issues when they take it down the drag strip or around the track.

can anyone confirm?

Might help if you mention what these 'traction control issues' are? I'm not aware of any common issues with the TC on either the 350z or the V35?

I think he means just traction issues, ie wheel spin. Yes, I would think that if you significantly increased the power you are going to have some traction concerns on the strip/track when you are only RWD. Although you would think the cars 'traction control' system would help a lot IF you left it on, lol.

Otherwise, sticky tires & good throttle control will be your friends. :)

I have noticed when I enter corners at high speeds the rear suspension tends to not cope with the balance as I would like it to. It's a bit soft...

I would like to keep the comfortable drive but to improve this problem are coil overs my only option or would sway bars fix it?

To keep your ride near where it is now, sway bars are the best option. You'll find the car skips a little more around the bends, but the improvement in chassis response more than makes up for it.

do these skylines have the traction issues that 350z are known to have??

I looked into working the engine in one of these or the 350 (probably turbo) but found with the 350 at least lots of people have traction issues when they take it down the drag strip or around the track.

can anyone confirm?

As a NA 350Z owner, I'm not entirely sure what you're talking about. The Z has more grip than grunt.

It does have axle tramp issues off the line due to the suspension geometry, and that's basically unfixable since its a function of how much camber the rear gets when it squats, but around the corner its got a crapload of grip in the rear. At the limit it does wash the nose if you're not progressive on the throttle, but getting rid of the staggered tyre setup fixes that (you will lose TCS/VDC but ABS still works). The thing doesn't start to oversteer unless you deliberately provoke it, and to keep it sliding once it breaks loose you have to keep clutch kicking.

Fair enough if you're doubling the power and torque by going to a TT kit then you'll find you have traction issues, even with R-Comps, but that's true for any 2WD car. You can't pin that as a "350Z" or FM platform issue.

If you don't take the car on the strip or circuit that often, and you just want a suspension setup for the winding road, I'd recommend doing adjustable swaybars first. If you're still finding it a fraction too soft for your tastes, then get a set of 350Z springs with Koni Yellow adjustable dampers. I've ridden in a few Zs with quite a few aftermarket suspension setups (Cusco, Zeal, Tein, Bilstein, HKS) and my favourite for street use was when I had OEM 350Z springs with Koni Yellows and adjustable swaybars.

Does your car have the LSD? I know that, historically, viscous LSDs have copped a bad rap, but the one in the FM platform cars actually works quite well. If you can't afford to buy a Quaife, and I'd avoid all the clutchpack LSDs for street use, then make sure your car has at least the OEM VLSD.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...