Jump to content
SAU Community

Recommended Posts

+1 for CRD. They did my 2nd rebuild.

$400 to get Tony (aka Fridge) From Eurotow to put it on his awesome truck and take it up to Sydney. You can drive it back.

My GTR has done this trip and no hassle and no damages. I have even traveled back with Tony in his truck.

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

$400 really? Fridge has helped me out a lot over the last couple of weeks I dunno why I didn't even think to ask him lol.

So CRD are as good as I've heard then.

Hmmm as you can imagine this is all a massive headf$&k lol

The main problem we faced though was actually getting the car there as we don't have something capable of towing a car trailer. That's the only reason we've decided to get it done in Canberra.

As others have said, Fridge does it for a good price. Failing that you can hire a Nissan Patrol from Hertz out in Queanbeyan - I did this with a car trailer, whole thing cost less than $300 to get a GTR back from Sydney.

Speaking of Canberra, I went out to the place that zebra suggested and it didn't look like it had been used in a while.

Fairly certain Pro Engines moved out of the address listed on their website years ago now. No idea where the current location would be.

Aside from CRD, if you get the engine out you can send it down to Race Pace in Melbourne. I got my current motor from them and it is awesome to drive, feels very healthy and responsive (and I flog the piss out of it, with a T04z hanging off the side). Just another option.

But all that aside, hopefully you have just spun a bearing and not caused any other damage. If this is the case it should be relatively cheap to fix given it sounds like you have all the other go fast bits already.

Edited by Amaru

Just out of curiosity how much did you guys spend on your rebuilds? You don't have to say if you don't want to.

And Richard you said you just had your second rebuild done, where was the first done and what happened?

I did my first rebuild with Pro Engines back in 2003. Cost was around $8000 and for that I got standard rods prepped, Arias forged pistons, ACL bearings, ARP studs, a bit of headwork, new gaskets etc. That motor lasted around 25,000kms running ~340awkw (HKS 2530's running at 25psi).

Second "rebuild" was more of a freshen up of the first rebuild I had. New bearings, aftermarket rods (cant remember what they were), new gaskets and studs etc. Cost was around $5k from memory and this was in 2005 and done by Pro Engines. This motor did 0km.

Third motor I am on now is the Racepace motor - cost was quite a bit, but worth every cent :D

Edited by Amaru

All of this is making me feel a lot better about our situation. Thanks heaps guys. I guess first step is finding out exactly what's ruined and needs fixing and then just go from there. The whole swap another engine in idea has gone out the window lol.

A little off topic....I work in fyshwick on Newcastle street and across the road from my shop in the carpark near j racing is a white 32 GTR with a black front bar that I see nearly every day, does it belong to anyone on here?

From memory the first rebuild was about $10k with new JE forgies, Eagle rods, Poncams. ACL race bearings, ARP headstud kit, full head service etc...

Out/In cost $2800 extra plus consumables like all fluids, sparkplugs and gaskets to bolt the boltons back on. Same shop Nik used.

So $12k to $15k is on par with ESP's quote but thats with all NEW pistons, rods, cams, bearings so you should come out if most of your internals are ok for $7k plus out/in of your block.

Second rebuild would have been the same except I needed new turbs, new JE Pistons oversized and I also decided to go more the full monty with 9.5l sump, Nitto oil pump & crank collar, Koyorad, CAB, 2L custom oil catch can, Haltech platinum pro ecu and the list goes on and on. This one is In the vicinity of just over $20k - CRD

Oil starvation twice with big end bearing failures scared the bejeezus out of me.

Now I have more oil than Texas in the GTR :rofl2:

The one thing I tried to take into account when choosing a GTR was oil starvation.....i knew it was gonna happen at some point, just didn't think it would be the day after we picked the car up lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...