Jump to content
SAU Community

Recommended Posts

FOR SALE

SET of NISMO LM GT2 rims in white... 18x10.5 + 15

all have 265 x 35 x18 tyres in good condition- sonar on front bout 50% tread- federals on rear 60-70% tread

all have centre caps and special aluminium tuner nuts and key in black.... $2500

**these are almost imposible to find these days and have that awesome oldschool look and stance

can try post pics or send via text/mms msg on 0404401766

ALSO set of TRUST/GREDDY type S coilovers to suit r33/34 gtr

these are height and 32 way damper adjustable- also have the damper extensions on the rear to poke thru parcel shelf (a must have) have both C spanners

good condition with no knocks or leaks $800

** willing to separate fronts n rears

2 x 33 gtr standard turbos... both suit rebuild $50 each

1 x r33 gtr stardard rear wing blade in kn6 blue/grey $50

1 x r33 gtr 3.5 inch kakimoto stainless exhaust.... 5 inch outlet.... will bolt up to 3 inch flange.... in awesome condition and sounds the part... can veiw on or off the car! $750

1 x HKS tuber timer... black in colour $50

*** can ship anywhere is aust at exspense of buyer

Can contact me on 0404401766 or via pm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...