Jump to content
SAU Community

Recommended Posts

Hey guys need to get new pads for the 31 so I thought an upgrade will probably work out not much more

Looking for something that uses a sliding caliper as 4pot brakes don't fit under my current wheels (and I'm not changing them)

So show me your old scraps, I will need rotors callipers and pads, and maybe lines too

I'm on the gold coast but can get to bris if needed (prefer gc tho)

Link to comment
https://www.sau.com.au/forums/topic/383911-sell-me-your-old-brakes/
Share on other sites

What a shame; I recently threw out set of modified 296mm x 32mm Soarer rotors, calipers and dogbone adaptors that I made for my old R31!

It was a great upgrade that fitted under all types of rims (over 16"); you just have to swap the struts from right to left; so the caliper is on the leading side; not trailing side of the strut.

Oh and machine a new set of hubs.whistling.gif

Sucks to be you.pinch.gif

The parts would only cost $50 -$100 from a Toyota wrecker; you should do it.



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...