Jump to content
SAU Community

Recommended Posts

Afternoon guys

So my mate has asked me to teach/supervise him for his L's. I'll be taking him for drives super early on Saturday mornings before the traffic hits in.

We have had a few laughs so far, and I think I'm just about on the verge of whip lash - he's just jumped in a car for the first time in his life and hes trying manual straight up.

Some find it easy of course, but he is finding it a bit difficult. He's done plenty of skids on his new rubber haha.. he gets too nervous with the clutch even when no one is behind him lol.

So anyways, if anyone has any really good pointers and tips, would highly appreciate it. I'm just taking him for the normal drives around the local areas, getting him to do a crap load of start and stops and the usual stuff. I'm sure some of you have found a few awesome out of the box tips and tricks for the new manual drivers.

Stories - I'm sure some of you have some funny ones to share!

Link to comment
https://www.sau.com.au/forums/topic/384057-teaching-learner-drivers-will-i-die/
Share on other sites

Get someone else to teach him on an auto licence, get him to do his full 3 years of P's and a year on his opens, then teach him...

That's what's worked for me and my mate at least. Luckily he doesn't fit in the skyline though. I honest to god would be scared at the thought of having to teach someone from scratch how to drive, obey the road rules etc though. My parents got me started off driving in a bush basher on a property back when i was a kid so it wasn't that bad for them, can't imagine how someone who's never touched a car in their life would go for the first time on a road.

Edited by sneakey pete

I'll be taking him southside areas (algester/forest lake).

Haha, no doubt he is difficult to teach. He has his own manual camry on his L's... so of course wants to learn in that. I've taken him for about 5 hours in total now, and I am able to sit in the car.

I've basically been taking him to massively long roads and just start and stop start and stop to learn how to get off first gear. He's getting there slowly but surely.... but I'm sure you guys would have to have some awesome tips that you made up yourself!

I've taught heaps of people on manuals for their Ls, you really need a large open area to start them off in, a few witches hats or boxs, first and second gear stuff, lots off reversing and emergency stops, then move into a closed of area or a low traffic area.

I find it good to have them do some reading on basic mechanics so the understand what their actions are actually doing, at work we get them to service the vehicles and go over every nut and bolt, cable and wire.

When on the road we also get them to tell us what they are doing when driving, i.e

Course; correct position on the road to negotiate the turn/stop ect

Mirrors and signals; looking for others, signal intentions

Speed; correct road speed to corner safely

Gears and mirrors; correct gear and road speed for that gear, look for others

Evasive action; stopping, cornering, obstacles

Acceleration; regard road surface and traffic conditions

And a lot off emergency braking on a wet and dry road, tell them that you are going to get them to do a emergency stop by yelling, stop stop stop, get them up to about 50 and the stop them, make sure they don't lock the brakes, if it doesn't have ABS get them to pump the pedal to avoid lock up.

Also skids, I kid you not , in a safe area where there is no one around or nothing to hit get them to do figure 8s or dirt or grass so they work out understeer, oversteer,counter steering, only if safe to do so, private land is good as the police will more than likely not be impressed.

Have fun and be safe.

Ah man, thanks for that reply.

That is pretty tops. I'll bring some witches hats out to so he gets used to how far away the left side and the front of the car is.

Thanks man, def a good read.

To help him master the clutch park him on flat ground, some place really quite. Then teach him to get the car moving using only the clutch, no gas. One he can do that with no problems manual is a doddle.

To help him master the clutch park him on flat ground, some place really quite. Then teach him to get the car moving using only the clutch, no gas. One he can do that with no problems manual is a doddle.

I think I'll also add this to the schedule man... Great tip

I just started teaching my little brother how to drive manual. Pretty much everything was covered by mlr. Just remember to keep yourself calm and not panic them if anything goes wrong. My dad used to get me to commentate on everything that was happening in front of me and whatever I was doing. Approaching roundabout, indicate, car entering round about on the right, 60km/hr sign etc etc. Gets you thinking about everything that you should be looking for unconciously. thumbsup.gif

I'm not a fan of slipping the clutch to much, you can cook the clutch and hot spot the fly wheel, I would be more inclined to just get a good take off with minimal clutch slipping and low rpm ensuring the car is not laboring.

It may be usefully to get him to find the friction point buy releasing the clutch pedal slowly with the hand brake on but the locking device depressed, let him feel the point when the engine speed reduces to show there is slight loading then gradually release the hand brake and with a slight increase in engine rpm release the clutch fully and move off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...