Jump to content
SAU Community

Recommended Posts

I just might consider importing a car from the great country of Japan, and have a few questions about it as im kind of new to it all

Im going off the j-spec imports site and they give a rough prediction of the price for every car for everything, excluding compliance.

Are there any other sites as comprehensive as j-spec?

How much is compliance, on average?

How long does the entire process take? from me choosing a car to it being in aus and me driving it

Cant think of any more right now but i'll probably come into some more

Link to comment
https://www.sau.com.au/forums/topic/384058-importing-a-car/
Share on other sites

Prestige Motorsport do the same as well. I can vouch for Geoff over here, imported my 370GT with his help earlier this year and couldn't be happier. He answered all 500 of my qustions without blinking and his guy in Japan found me an immaculate car. Keep in mind that depending on what you buy, it may be cheaper to have the car complianced over east and pay for extra shipping, thats what I ended up doing.

One piece of advice, get something that is completely stock. Any mods will need to be removed for compliance and replaced with stock parts which could obviously cost a fortune. Also Geoff recommends a Forex Trader to transfer the money to Japan, which ensures that you dont get raped by any banks.

Google Prestige Motorsport, he has ballpark prices for all the major models (using actual sales prices) as we as other information and spreadsheets which will explain the whole process in detail.

Good luck to you, if you have the cash and the patience, importing is the way to go. I ended up with a $45-50,000 car for under $40,000, on the road. :-)

P.S

You will find answers to both of your questions on his website. Compliance costs will vary wildly based on the model of car and who does it. As an example, there are guys on here that paid over $5,000 for their 370GT compliance in NSW/Vic, I was quoted $5-6 by some places here in Perth but ended up having it done in Brisvegas for just over $3,000. $1,000 extra shipping to Perth, but the money saved paid for the brand new $1350 tyres and Geoffs fee.

Time to get the car in your garage will depend completely on when the car can get on a boat from Japan and how long the workshop and Government take for compliance. Mine waited only a few days in Japan but a guy here in Perth that bought one 2 weeks earlier had his car on the same boat as mine. At the VERY best, it will take a month, but expect it to take 2 or more. Gives you time to start thinking about all of the mods that you are going to set your money on fire with once it arrives.

Edited by Alkatraz
Link to comment
https://www.sau.com.au/forums/topic/384058-importing-a-car/#findComment-6127299
Share on other sites

Wow thanks for all that i might just keep looking around for a while. Im in no hurry to do anything just yet and i'll probably only really start to act sometime next year.

Sounds like you had a really good experience with them too so i wont just stick to looking in one place.

And whats the deal with compliancing over east? Have they got less strict regulations or something?

I dont think time and waiting will be a problem for me i dont mind waiting a while for something

Link to comment
https://www.sau.com.au/forums/topic/384058-importing-a-car/#findComment-6129148
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...