Jump to content
SAU Community

To get a cheapy or not a cheapy that is the question


Recommended Posts

Hello all,

Not sure if this is the best place to post this question.. but if not please move it for me. :D

The question is... UHF radio is there something special I should look for? or just get the cheapest and nastiest there is? :thumbsup:

Just need an idea on how much to spend on one and wether there is any recommended one (or one to stay away from).

Cheers,

To get a cheapy or not a cheapy that is the question

go for the Uniden twin pack and go halves with someone, any other cheapies have no range imho

OR

go for an in car radio, Belgarion has one, ask him if you are interested :thumbsup:

just so you know uniden also make a stronger wattage hand held for about 150 or so which i spotted in a dicksmith catalogue

the stronger the wattage the better reception and larger ears you have... so to speak

(i got big ears) in cars are expensive however most uniden hand held radios are good quality.

yeah alex go splits with ben on the uniden ones, they're about 100 or 150, so its good when u split with someone else. just make sure u have backup batteries as they munch them up fairly quickly! but im sure they all do that.

I got this brick from work, and it's range is awesome for a hand held, dunno how much it costs though, I will be looking at an incar hooked up through stereo, I reckon incar is the only way to go for range!! This one I got is a GME TX6000.

I went halfs with my mate on the tiny tiny tiny twin pack one. They do the job on the highway, but arent too much chop out further.

Also get one that uses AA batteries not AAA batteries. The thing will pay for its self in like 2months :)

As far as cheap UHF radio's go .. You get what you pay for, cheap rubbish with less than 100m range.

The GME TX 6000 are good for a handheld radio and far better than any of the uniden range.

Me personally, I prefer a commercial grade of radio, Standard Communications GX 2000-U, or a Tait T2020 with 25 watts of RF punch [my ears must be huge hey BelGarion], though I use the GX 2000 more often as it more robust.

Expect to pay $600 for a Tait and around $1000 for a [sC] GX 2000.

Palm beach!! your kidding haha i was there last weekend at the telebudgera surf life saving RSL i think it was

I bought the 2watt Uniden hand held, has a minium of 5km range which is definately true

i was talking to some guy atleast 5 km away before on mine

has LOW/MED/HIGH modes too if you want longer distance or shorter without wasting batteies

$160 from autobahn

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
    • No ABS, no TCS, no airbags, no cruise control, no lane departure assist, no emergency brake assist, no orange lights in the mirrors (continuously annoying me in multi-lane traffic), no stupid rear view camera. I am the one responsible for where my car goes and how it does it.
    • Cheapest Jaycar one is only $65.
    • Probably best way would be using a proper dB / SPL meter lol Buy one and ship it from state to state to have a consistent test device lololol  
×
×
  • Create New...