Jump to content
SAU Community

Recommended Posts

hey guys just really getting annoyed with my car when driving it cold or even first line in dash water temp...

i just drive ok soon as i hit 3000/4000rpm just sounds like it splatters/hesitates, exhaust sound is like brrrrr brrr when between that rev range but when its fully warm no problem at all runs good...just dont get it..

any ideas guys cause have to always wait till it warms up fully and is a pain..

Well i just changed the turbo to slightly bigger and it is doing it all of a sudden never done it with the stock one... just when im about to hit boost which is the revs i described....

Under oiled turbo? u mean like no oil coming through or just takes a while to get oil in until its fuilly warm....seems like that.

Edited by RamR33

your probably hitting R+R because its still cold and you have a bigger turbo

doubt its anything to do with turbo bearings being under oiled

not much you can do about it if you still have the std ECU, its a tuning thing

if it was the bearings it be stuffed and smoking and all plus i have a braided line which came with the turbo which was new and i have a greddy computer on it so im sure its a tuning thing as it wasnt really tuned only tuned for detonation as in power tune...its still ok but just takes awhile to warm up but i guess i can live with that for now :)

my r32 has the same issue exactly for over 6 months now. Stock ECU, stock r33 turbo. I had a TR43 turbo before but changed to a r33 turbo now - I've changed fuel pump, coil packs, spark plugs and O2 sensor, still there. Funny thing is, the issue goes away EXACTLY when the temp gauge hits half way mark - on the DOT!

any other ideas? :(

i maybe thought it was going into coldstart mode so thought it was the water temp sensor but guess not...like u said when its half way or at its normal engine temp its all good.....Maybe FPR or AFM...

Has to be ecu just going a lil koo koo until it hits its normal operating temp.Tune must be the last option i guess.

Edited by RamR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...