Jump to content
SAU Community

Recommended Posts

R33 series 1, Clear red metallic ( the colour everyone calls burgandy..)

all standard apart from:

Greddy FMIC /piping & washer bottle

RDA slotted rotors & pads ( were only 5 months old at time of crash)

Enkei RS-Evolution lightweight rims (17's - all 235/45s)

Factory electric sunroof

Xforce exhaust which has been modified to fit standard muffler ( will bolt on direct just after rear axle, modified for the lovely people at the EPA. ;)

Also has adjustable suspension, from what i was told by previous owner - however will find out and update this information.

Engine is in the 190,000 range. Was running strong with no problems before crash.

Car was written off a few months back. Was still drivable after crash, was pretty much t-boned on the drivers side - so there is driver side damage to the car along with some damage to the passenger side.

Just wanting to get rid of whole car as will be moving soon. Looking around 1800 ono, which is pretty low considering the parts and also is very negotiable. Open to offers.

Will be putting up pictures later tonight and updating info as well. If interested, let me know

Edited by brettw88

car is a 1994 Gtst with the RB25DET engine

also, car is Auto..sorry forgot to mention

photos of car will be up later tonight.

Edited by brettw88

Hey dude.

Are you able to define Northern Vic?

Also, are you parting it out or trying to sell as a whole first?

Cheers.

Hey dude.

Are you able to define Northern Vic?

Also, are you parting it out or trying to sell as a whole first?

Cheers.

Cars located in Kilmore.

Selling as a whole car as stated, need it gone as its located on fathers property and he needs it gone as he is moving in next few months,

Cheers

in regards to the suspension, looks to be the standard adjustable that came with the car as told by previous owner.

will post pics when have some.

Edited by brettw88
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...