Jump to content
SAU Community

Recommended Posts

I understand that he May be very busy doing the Big Jobs because lets face it that's where the money is.
I was more than happy to wait 3 months for my Item to be made , but when he does not reply to emails or return phone calls for an update

it makes me very angry. I can only assume he does not give a f**k about the smaller jobs even though they have been paid for.


  • Like 1

As far as I can see he has to take on new work to make some money to pay back what he owes.

I'm not saying the situation is OK, but where do you think any owed money is going to materialise from?

I don't see the relevance...whether it was beer and hookers, a boat in the Bahamas or just the rent that month, if you are owed money what matters is how you could get it back. And the best thing people who are owed money can hope is that he gets work in, turns it around, and makes some money to pay them back.

All I can say from my experience is I wish it was that easy!

Duncan I'm under the understanding you too have been in this position with him, surely you can understand the frustration that all these people have. Some people have families, others merely want their parts & cars sorted.

With him avoiding every single person here or simply lying to them - how is anything going to get resolved?

I've been following this thread for a while now, and whilst I understand where you are coming from Duncan, it is quite obvious that he has no real intention of righting his wrongs. The fact that he makes outlandish excuses and doesn't answer/return phone calls, shows that he has no integrity and is hoping that most of you will just give up after a while.

Has anyone here tried to get the relevant authorities involved?

My experiences are endless!

Who am I, isn't relevant!

Obviously your mates with Brad, which is your call. I've read your previous posts about your experience with him, and I'm guessing in your short time you've been brain washed with lies also! About his work, personal issues & work load!

As you can see here, he OWES people! End of story!

This

Frisky do you have a current outstanding issue with ProFab?

My experiences are endless!

Who am I, isn't relevant!

Obviously your mates with Brad, which is your call. I've read your previous posts about your experience with him, and I'm guessing in your short time you've been brain washed with lies also! About his work, personal issues & work load!

As you can see here, he OWES people! End of story!

I have no doubt that there is people here that have issues with Brad, I've read all about it here on this forum.

These people have actually posted their experiences and justify why they are upset with him (and they justify their posts). You on the other hand use 5 of your grand total of 9 posts on SAU to fan the flames.

surely you have better things to do with your life

Personally I don't give a rats what you think!

I'm glad he's done right by you!

I don't have to tell of my experience cause there isn't just one!

I'm not fanning the flames at all, but I think it was time for me to give people some answers!

I know of you, so I'm not worried at all!

What I do with my life is non of your business, plus all I can say is if only you knew!

You obviously only know what you know I can't hold you responsible for that.

But because I won't post my experience you feel the need to lash out?

I have never once said Brads work isn't good, I'm sure it's great. But his work ethics are a disgrace. Perhaps instead of "reeling me in" take a look at the Performace Forums. I'm sure the title reads "Pro Fabrication Lies, Lies, Lie & More Lies".

You obviously only know what you know I can't hold you responsible for that.

But because I won't post my experience you feel the need to lash out?

I have never once said Brads work isn't good, I'm sure it's great. But his work ethics are a disgrace. Perhaps instead of "reeling me in" take a look at the Performace Forums. I'm sure the title reads "Pro Fabrication Lies, Lies, Lie & More Lies".

Mate, you have a hidden agenda, anyone with half a brain can figure out who you are and what you are trying to do.

I'm not lashing out, I'm quite calm actually

Like i said people have business issues with brad, You have personal issues. This is not the place for personal issues

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...