Jump to content
SAU Community

Recommended Posts

knore, as soon as i finished my run i collected my timeslip then lined up and waited 5mins if that and away i was.

I got 14.0 on my second go and i keep going back around destined to get that 13 sec pass hehe i got it on my 8th run finally

smooth the tyres made a great difference, i was getting 2.1 60" times on most runs they were great

So what method did you use MJ

hold front brakes.. stall up a little .. release?

hand brake?

what rpm launch?

There some good times, but i thought youd get better with 181rwkw

I doubt ill get the times i want my first time too :)

im hoping for low 13s once everythings done

maybe a touch of 12 if im REALLY lucky

knore the only other gtst that beat me was belgarions car which did 13.7 im not including jlnewton though :)

mods and caluation of times in theory dont work the same in real life.......most ppl got 14's

i just held the foot brake with my left foot and revved to about 3k and then when the green light came on i was off :D

i do have brand new falken azenis semi slicks though

knore it all comes down to practise and experience. The first time i went to the track with my skyline i had a full exhaust and pod and 10psi and best i ran was 15.0 heheh.

Alot of ppl talk up how quick their car is on the net........i see it alot on the silvia forums it doesnt mean shit unless you get a timeslip to prove it.

Damn straight, i couldnt agree more, im sick of people saying im driving a 12sec car etc etc

I know mines good for a low 13 with the right driving, realistically will have about 210kw at the wheels when i goto willowbank..

Probably get gavin to tune it as i have sitc aswell.

I did 8 runs, with the 7th being the quickest and the 8th being the first dying scream from my clutch, therefore ending my night before anything serious happened.

Best run

13.467 @ 101.60mph 60 ft 1.895

Not bad for a total stocker with different wheels!

I only ended up having 4 runs as it was my first time out with the Motec installed and it badly needed re-tuning as I couldn't push it past 6000 - 6500 rpm which really affected my times....

My best was my first run:

60ft : 1.916

E.T. : 13.409

MPH : 101.60

Now for a decent tune.....

Cam :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...