Im Thinking Od A R30Dett Conversion With -5S

[GTRAAH]

I have everything except the modified rb30 block and the forged internals, Now my nismo dsah says 11000 rpm rev limiter on the taco.

I know even with a rb26 its to hard to reach that but with a Rb30 will it even touch the 9 or 10 rpm points?

No troll being serious here

[zebra]

Not with -5s it wont

[R31Nismoid]

With -5 turbos there is no need to rev past 8500 on a 2.6ltr

So on a 3ltr it would be somewhere under 8000rpm. Power & torque would be non-existent the higher you go as the turbos will simply run out of flow and drop majorly in boost - hence the revs are irrelevant given your turbo choice.

If you said a 1200hp+ turbo setup, then a different story.

[GTRAAH]

so practically it will rev limit at 8000rpm.. do you think this is a good setup as i want power right through out the revs, 1 2 3 4 5 6 etc... My aim is a 10 sec street car high 10s are fine but I dont want too much lag. and im looking at the 400awkw mark.

[R31Nismoid]

You don't want much lag but you wanted to rev to 11,000rpm

You sure you weren't trolling?

There are plenty of -5s threads, results etc.. Use the search.