Jump to content
SAU Community

Recommended Posts

Be mindful the 5870 will be "brought down" to the 5850 speed.if you CF them together. It does not "balance".

And overall you'll then loose a little more performance as crossfire is never linear increases/gains as it appears crossfire backs off a bit more with two cards that are not identical.

plug them both in put all associated power cables on and add a crossfire bridge cable

crossfiebridgeas-sml.jpg<<Click

Got that but I'm trying to work out what needs to be plugged into the othe gfx card because I can't see the same plugs spare that are in the current gfx card

And what pin outs do you have over the 2 cards?

Without know the brand, its hard to tell. Diff brands of the same card can have different pinouts etc.

at the moment i have 2 6x pins into the one gfx card and when i went to install the other gfx i evened it out 1 6x pin and 1 2x pin into one gfx and same with the other, and when i went to turn it on

it was making a constant beeping sound and there was no display

ok took my pc to pc diy after work today, and they said my pci express slots are too close to each other so my gfx would over heat. so for now im just going to reformat the computer (fun) and hopefully it will speed it up abit, also got them to over clock it safely

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
    • Someone needs to copy it, improve it aesthetically, make it DBW ready from day 0 and send it to the motherland Chynah for my relatives to cast it and mass produce it 😅
×
×
  • Create New...