Jump to content
SAU Community

Recommended Posts

There was recently a group buy for CAI's, i think there still a few left, anyway are they Legal? i get done by the EPA atleast twice a year for the last 4 years now and at the stage where i cop a on the spot $500 fine, and not really looking for anymore, so anyone have a definite answer?

last time the said either loose the front mount or poddy, cant have both.

Link to comment
https://www.sau.com.au/forums/topic/38682-custom-cai-legal/
Share on other sites

have you considered the stock air box and a highflow panel filter?

should flow just as much as air as the pod filter, however you'll probably loose the stucking induction noise. the airbox is probably better vs pod in the engine bay anyway and cops can still see the pod in the cai box. the reason the pod is bad mmmkay is cos they are oiled. i think dry ones arent illegal?

anyone clarify?

Link to comment
https://www.sau.com.au/forums/topic/38682-custom-cai-legal/#findComment-783203
Share on other sites

The laws differ from state to state.

eg in qld your allowed to use a pod filter, in nsw it's illegal to use one.

the reason the pod is bad mmmkay is cos they are oiled. i think dry ones arent illegal?

I'm using a K&N panel filter which is oiled and is legal.

It passed the engineers report and several checks by cops.

Link to comment
https://www.sau.com.au/forums/topic/38682-custom-cai-legal/#findComment-783651
Share on other sites

the problem with the pod in the engine bay is the fact that it is a fire hazard.

The oiled cotton part of the filter 'could' be subject to fire since its not shielded from the engine bay in any way.

As long as this fire hazard is removed, then there shouldn't be a problem.

Look at the new FPV GT, it has a pod filter inside a housing, and its built by a manufacturor!

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/38682-custom-cai-legal/#findComment-783800
Share on other sites

i know that the factory box with a KN filter is better then a slapped on poddy, but thought since with CAI it is sheilded from heat, and might match the factory box and sound better as well.

Biggest concern is wether its legal, i know in vic we can have a poddy if its not oil based, but we cant have a cooler at the same time.

Link to comment
https://www.sau.com.au/forums/topic/38682-custom-cai-legal/#findComment-784133
Share on other sites

yup.. well one of the reasons i moved outta melb.. too much bullshit on the roads now.

When i got done for a full EPA test in VIC that is what the inspector said to me - one of intercooler or pod, so the choice is at least there. I'd say with VIC being what it is, they won't care its in a box as its still a pod and they want their revenue.

Whereas some other states have laws about it being ok if shielded, ok if its engineered, or the like.

And QLD well.. lol

Link to comment
https://www.sau.com.au/forums/topic/38682-custom-cai-legal/#findComment-784323
Share on other sites

in qld the only way u can get into shit for ur pod is if it's not secured to anythang...

Qld is one of the "easy" states when it comes to pod filters and emission laws and not to mention so called mod plates.

That's why my car is still engineered and registered in nsw even though I live in qld.

Vic used to be easy but in recent years has got it's act together where it's laws are almost identical to NSW where pod filters need engineers reports as they increase emissions.

Not many RTa approved engineers will approve pod filters today as they know they will be scrutinized by the EPA.

Sounds pretty stupid tho as there are many ways to increase emissions.

Link to comment
https://www.sau.com.au/forums/topic/38682-custom-cai-legal/#findComment-785335
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...