Jump to content
SAU Community

Rb26 Vs Rb25 Clutch Fans

works 510

By works 510,
in Engines & Forced Induction

 Share

Recommended Posts

CrimsonLey Rising Star

CrimsonLey

Posted
Posted

The clutch fan is not in my car's future. I'm sticking to electric fans. My reason is this: 1) Clutch fan is big and I don't have much bay room 2) IMO,properly configured thermo fans can performance equally as good 3) Clutch fans don't cool the fluid in the radiator as well as a pusher fan attached directly on a radiator would 4) Small response gains from electric fans are worth it even though my electrical system (alternator) takes a hit 5) My Haltech can control the electric fans

I'm sure there's a list of PROs to the clutch fan but the above list really matches my needs.

cheers.gif

CrimsonLey Rising Star

CrimsonLey

Posted
Posted

do you have a proper shroud, if your using a thermo then a full shroud is a must to get ant sort of efficiency from it.

No, I do not. I haven't started purchasing anything ATM. I'm listening if you got info to pass regarding shrouds.

nobby Collaborator

nobby

Posted
Posted

you may find the rad core is not capable of decent air flow hence poor cooling.

its about effiencey.

N1 pump has larger fins and backing plate to cut down on cavitation, turbulence within pump housing,

If your hanging high rev's frequently then, maybe pulley size can be changed to slow pump a bit and give the water a chance to cool, before it's returned to engine from rad.

lots can be done, speak with a pro about it, fix should = reliability.

CrimsonLey Rising Star

CrimsonLey

Posted
Posted

you may find the rad core is not capable of decent air flow hence poor cooling.

its about effiencey.

N1 pump has larger fins and backing plate to cut down on cavitation, turbulence within pump housing,

If your hanging high rev's frequently then, maybe pulley size can be changed to slow pump a bit and give the water a chance to cool, before it's returned to engine from rad.

lots can be done, speak with a pro about it, fix should = reliability.

I have an after market radiator. Not the best but it works. I'm also rocking the stock RB26 water pump. No issue as of yet with it. I don't I'm fine on the coolant side but I do need to improve my fan configuration.

W0rp3D Grand Master

W0rp3D

Posted
Posted

No, I do not. I haven't started purchasing anything ATM. I'm listening if you got info to pass regarding shrouds.

If you just bolt the thermo onto the rad your pretty much only cooling that circle where the fan is, if you have a full shroud (like the factory one) you will be drawing air through most of the surface area of the radiator which is a lot mor efficient than just one section, there is dual and single setups on ebay.

CrimsonLey Rising Star

CrimsonLey

Posted
Posted (edited)

^^

My current setup is a puller fan cooling the engine (replaced the clutch fan). The shop the previous owner used wired the puller fan off the A/C -overheat - fan's rely in the fuse box and set it to turn on with the ignition. I only have 1 fan that works and its ALWAYS on.

I will still have that same puller fan for my future setup but I will add some sort of shroud to it and direct it towards the engine. I'm planning on removing the condenser and installing a brand new pusher fan in place of the old A/C fan. That brand new pusher fan will be hugging the radiator and I want to control both fans via the temperature sensor and my Haltech ECU. I eventually plan on getting air panels attached on the sides of the radiator and intercooler to direct air towards the IC and radiator.

Edited by Bigalow
CrimsonLey Rising Star

CrimsonLey

Posted
Posted

I ditched my aircon and had two 11" thermos on the front of the radiator (no shroud) but retained the engine fan and shroud.

I was thinking of having the same exact configuration as you, bud. I decided to do the setup I previously posted about. If for some reason my tuner or my car tells me that the clutch fan is necessary again then I will do the 3 fan setup like you: 1 clutch fan and two pusher fans in the front.

cheers.gif (fosters)

CrimsonLey Rising Star

CrimsonLey

Posted
Posted

uestion about Shrouds:

Do I want a big shroud engulfing the radiator (such as stock) or is the shroud that comes with the thermo fan enough?

(STOCK GTT)

DSC_9426.jpg

VS

(I have something similar to this fan. Notice the shroud surrounding the fan)

143.jpg

CrimsonLey Rising Star

CrimsonLey

Posted
Posted

ideally a shroud covering the whole radiator so the fan can pull air from the whole core and niot just the area the fan sits

Exactly what I was thinking but I wanted to confirm with ya'll first. Do you know (or anyone reading) know if the ER34 fan-shroud combo is compatible with another Nissan (i.e. R32 GTR, 300ZX, etc)? I'm asking so I can have more search options.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Thanks for the linkie. Certainly always a great deal of help when people post comparisons like these, but I think for now I'll stay away from any semi slicks. I did go ahead and order the sportcontact 7. My buddy has them on his modified A4 and he keeps saying how good they are. For my intended purposes these will probably work real well. I'll report on them once I had the chance to try them out
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Talk about noisy. Even when I still had the Tomei under the car I could distinctly hear the tires rolling. And I doubt I ever will need maximum grip like on a track. My GTR will maybe never even see the 600hp mark and I need to get used to the car quite a bit before challenging the limits of its handling. For the next winter storage I think I will get a set of these rubber drive-on thingies that have a tire shaped base. Those supposedly really help prevent flat spots.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Well our climate is definitely way less hot overall and the weather can be quite picky at times. I just know that during normal road use or even spirited drives there is no way I'd be able to consistently stay in the operating temperature, and constantly changing the tire pressure would also be a royal pain.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
×
×
  • Create New...