Jump to content
SAU Community

Recommended Posts

I've always liked the Mazda Rx-7 FD3S but the fuel consumption is apparently astronomical...so I couldn't afford to run, let alone maintain one.

Rubbish! 13B's are frugal and FD's are light :thumbsup:

  • Like 1

Rubbish! 13B's are frugal and FD's are light :thumbsup:

I heard someone say typical fuel consumption would be around 18L per 100kms? Thats not exactly frugal lol.

To the guy who said I don't know how to drive....I'll send you a PM in confidence. It was more so the fact I had to rapidly alter my line due to the oncoming car cutting the corner and I had the front brakes lock up viciously. Immediately applied full opposite lock but seeing as I had hit the brakes whilst hitting the apex there was no chance of saving it.

And Stig Mick, If I liked agressive looking cars I'd definately go for the S14 Kouki. S15 also. But I prefer modest and humble and smiley faced cars. eg S13 Silvia. (No Homo)

Edited by vtecricer

So basically when I crashed my car.....I destroyed a collectible classic?

As bad I was already feeling...I now feel about 100 x more bad. Wow.....=(.

A collectable classic.......omg i cant stop laughing. you find find S13s anywhere and everywhere. Maybe a Mint VspecII 32 GTR that hasnt been touched or a mint Aus delivered 32 GTR is a collectable.....

As much as I like having fun bagging him

A mint anything import is a collectors item

That's why I haven't got a single aftermarket part on my s15 not even the cd player, in 10 years time it's gotta be worth something

A collectable classic.......omg i cant stop laughing. you find find S13s anywhere and everywhere. Maybe a Mint VspecII 32 GTR that hasnt been touched or a mint Aus delivered 32 GTR is a collectable.....

You better stop laughing then. Mint S13s have been going up in value for the last 2 years at least. If you wanted to import a grade 4 Type X with under 100,000km (legit), don't expect change out of $15K landed and complied.

They won't fetch the prices of VS2 R32s, but then again they were never as expensive in the first place either. A good original S13 with service records is money in the bank in my books.

You better stop laughing then. Mint S13s have been going up in value for the last 2 years at least. If you wanted to import a grade 4 Type X with under 100,000km (legit), don't expect change out of $15K landed and complied.

They won't fetch the prices of VS2 R32s, but then again they were never as expensive in the first place either. A good original S13 with service records is money in the bank in my books.

When I came on this forum, I never received one compliment about my S13...except from Mr.Eps.

Mine came over from Japan with 58,000km's and log books in 2000. And was meticulously maintained for 10 years by female owner (middle-aged) with service records etc.

I told people my car was worth something, and they laughed at me (like they laughed at you Iron Chef).

1o92zo.jpg

It died with 143,900km's on the clock. I got it with 126,000kms.

They were the best 17,900kms of my life.

Driving my mum's E90 corolla now and it makes me feel sick how much body roll it has.

Edited by vtecricer

^^ Exactly. LOL. But the s13 silvia is the definition of a "tuner" car....basically a perfect sports car. The only problem inherent in the chassis is a non progressive build up to oversteer.

And Stig Mick, mine was going to be converted to a 5 speed SR20DET. Was planning to modify it tastefully and extract 300rwhp. Sigh.

In all seriousness, even though it was a freak accident....its taught me a good lesson in that things can happen when you least expect. I consider myself to be a good driver "Relative" to the experience I have, the external car that was coming up the mountain, caused me to "Alter" my habits which is why I lost it. I shouldn't of braked either and done my best without the brakes, although this most likely would of resulted in a head on collission if I didn't as the commodore had already cut the double lines

Stig, I'll send you a PM naow.

Edited by vtecricer

they're only collectable because 99.9% of S13's have been crashed at least once or come over looking like they were used as a portable doghouse / getaway car etc :rofl2:

It's like trying to find a Cefiro that has never had the interior pulled out

That's pretty much it - so many have been used for drifting that good ones are very rare these days.

I also imported a 23,000km Cefiro for an Adelaide customer a few years back ;)

i bought this mint condition 89 S13 K's spec manual CA18DET, with HUD and genuine grade 4.5 with 59 000kms in 1999 from an importer for 11K, drove like it came from the showroom - slammed it, boosted it then stoopidly put it through a round about. back then there were no import yards around then and they brought in two other SR20 N/As in champagne gold and two tone cream one was a rare A's model.

5f2m92.jpg

your best bet nowadays is to pick up a stock lowish km aus delivered auto S14a like i did for around 7k as it has five stud conversion, turbo brakes and running gear and is already agood platform to work with. im doing a VH45de swap so lookn forward to some fun times soon.

i bought this mint condition 89 S13 K's spec manual CA18DET, with HUD and genuine grade 4.5 with 59 000kms in 1999 from an importer for 11K, drove like it came from the showroom - slammed it, boosted it then stoopidly put it through a round about. back then there were no import yards around then and they brought in two other SR20 N/As in champagne gold and two tone cream one was a rare A's model.

5f2m92.jpg

your best bet nowadays is to pick up a stock lowish km aus delivered auto S14a like i did for around 7k as it has five stud conversion, turbo brakes and running gear and is already agood platform to work with. im doing a VH45de swap so lookn forward to some fun times soon.

Yours looked beautiful. R.I.P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The team at OBD2 Australia are pretty good, shoot them an email and ask them. I've dealt with them before for work stuff. I'd be shocked if it didn't work, so long as Consult can activate the ABS. But you might need to use KLine for it which would be the stopper, as I don't think that piece does KLine comms.
    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
×
×
  • Create New...