Jump to content
SAU Community

Recommended Posts

Hi guys , stripping all the parts off my 32 after someone wrote it off. :( Was one of the cleanest 32's out there that I imported from HKS in Japan.

The car prior

post-69937-0-46289800-1326106439_thumb.jpg

post-69937-0-41081800-1326106616_thumb.jpg

The car after

post-69937-0-65059000-1326106357_thumb.jpg

Everything is going ,

Interesting parts -

POWER FC with Hand controller and FC Hako Usb conection and tuning software ( ECU Also has a RacePace tune on it) $850 delievered

Splitfire Coilpacks (Around 3000K's use) $450 delivered

Bride replica seat with rail $400 (Would preffer pickup)

HKS Speed limit Defender $150 delivered

Nismo 320KMPH cluster$ 200 delivered

Bee*R Rev limiter $200 delivered

Tein Winding master Coilovers $800 bucks (They are amazing)

Aluminuin radiator $300

HKS SSQV Bov - make me an offer

HKS mushrooms make me an offer

Also have Cusco Controller arms , strut brace , braided brake lines and heaps of other stuff if you want to come past one day and check them out .

+ The rest of a '93 GTR including all switches, door trims , dashboard , N1 bootlip , pods and spoiler. - EVERYTHING IN ABSOLUTE PRISTINE CONDITION.

Engine has around 145- 150 thousand K's , made 265RWKW @ 14 psi with intake , exhaust , coilpacks and power FC.

Any parts that you need , let me know and ill tell you if i have them .

Any pictures that you guys need , ill take , just very bust at the moment with work.

My Mobile is 0434112724 , if i dont asnwer im at work , but feel free to send a text and ill get back to you ASAP.

Make me an offer.

Thanks guys.

EDIT:

Parts that are gone :

Dashboard

Nismo Cluster

gauge cluster

AC controller

N1 Bootlip

Drivers STANDARD seat (still have the Bride)

Both Door trims

Link to comment
https://www.sau.com.au/forums/topic/387691-wrecking-r32-gtr-vic/
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

front brakes?

Yes , non v spec calipers , RDA rotors and A1RM pads

500 all up.

Ive got a potential buyer for the whole car though , so ill let you know tommorow .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...