Jump to content
SAU Community

Recommended Posts

I came across these posted in another thread - thought it might be useful to put up for common info.

All vehicle regulations are supposedly governed by NCOP.(National Code of Practice) in conjunction with ADR.

Window Tinting clause 7.2 page 24 http://www.infrastru...0_01Jan2011.pdf short answer 70% transmittance (30% tint)

Wheels & Tyres table on Page 23 http://www.infrastru...n_2011%20v3.pdf get to know your maximum tyre widths / aspect ratios in relation to stock.

all codes here : http://www.infrastru...n/vsb_ncop.aspx

Link to comment
https://www.sau.com.au/forums/topic/387718-adrlegal-vehicle-requirements/
Share on other sites

That's not what it says about tinting:

  • For the windows forward of the rear of the driver’s seat luminous transmittance must not be less than 70% when measured through glass and film together unless the laws of a State or Territory allow a lesser luminous transmittance. The lesser transmittance must be above 35%. (Figure LZ-G2 illustrates the window tinting requirements in terms of luminous transmittance for passenger vehicles. It also specifies the different requirements currently in force in the Northern Territory);
  • For windows behind the rear of the driver’s seat the luminous transmittance must not be less than 35%;
  • Reflectance in the visible light range must not exceed 10%; and
  • The coating must not be wrinkled, blistered, bubbled or discoloured such that visibility through the glass and film is impaired.

Which basically says 70% unless the state allows a lower transmittance - in-which case the minimum is 35%. South Australia allows for 35%.

http://www.transport.sa.gov.au/pdfs/personal_transport/light_vehicles_pdfs/MR430_Window_Tinting.pdf

For full information on South Australian laws regarding tinting - which includes information on 'body tinting' (which many of our cars came from the factory with - mine has AS3 rated rear glass).

I just had mine retinted last week, they checked the tint that existed from japan and it was 17% from the B pillar back and cleared regency with that on .....the australian aftermarket front windows came up 29% from a local tinter a few years ago(it was supposed to be 35% ?). using the same laser tester as police use.

dont forget the UV built into the clear glass can throw off the laser enough to be non compliant

regency compliance thought my car had privacy glass in back but it was just tint. scratched nicely from the compliancer installing baby bolts. thru the speaker grills, muppets !!!

the new tint came up 34% from Tint a Car using max legal darkness tint , the clear glass had a few % in it on the front and a little bit more on the backs.

I want 5% on all grrrrrrrr its ghey so hot here but in arizonia its legal for that reason alone. police safety my ass. you dont have guns here like states

How in the hell is anyone supposed to weed thru all these rules for a simple mod . might as well study law ...then they get you to spend more money to engineer it. its a sham , a fleecing of money

and in the long run adelaide has its own rules, or SUSS defect , a catch all for more money... reminds me of the dude on today tonight with the corvette and blue stripes. or the land barge that wanted disk brakes but couldnt update , or seatbelts on old cars,,, all ghey rules

no intrusion bars or anything , we suck in S.A

Yeah, must suck hard having the car not fold in half like paper when getting t-boned. The ADRs are fine, its the people who interpret them and the system that enforces it is the problem.

http://www134.lunapic.com/do-not-link-here-use-hosting-instead/132631006398890?9739960111

Edited by Bl4cK32

Yeah, must suck hard having the car not fold in half like paper when getting t-boned. The ADRs are fine, its the people who interpret them and the system that enforces it is the problem.

http://www134.lunapic.com/do-not-link-here-use-hosting-instead/132631006398890?9739960111

My point was - the ADRs were meant to have been done already before i got it , since the car had been in Australia for 2 years already . WTF

Whats amazing is Regency ended up letting the car pass with no intrusion bars because it was already registered in Australia / Queensland

The Ironic thing is it was T_BONED by a 4WD and written off last year . Genuine 30k car GRRRRRRRR , it was worse than a death in the family

^^^ and I didn't even bite :) .... bad news too Matty - Nick's appendix has burst or something, so he is out for Schutzenfest. I might have to see if the wife can drop us in. And we are invited to a shindig with Munro at the Walkers Arms at 7pm Sat night on the way home if you are keen.

^^^ and I didn't even bite :) .... bad news too Matty - Nick's appendix has burst or something, so he is out for Schutzenfest. I might have to see if the wife can drop us in. And we are invited to a shindig with Munro at the Walkers Arms at 7pm Sat night on the way home if you are keen.

yeah mate sounds good, (not about nick though) can just get a cab from your place. might be easier and less hassle with the wifey:) keep the peace

Interesting read Andrew, cheers.

I notice it makes no mention of adjustable coilovers, just that if they fit to the standard mounting points they're legal. Win.

Also corrects a mate of mine the other day who tried to tell me my strut brace was illegal...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...