Jump to content
SAU Community

Recommended Posts

A while after I had my clutch pedal adjusted it started making some scraping sounds (best way I can describe it) that went away and came back a few days ago. So I'm pretty sure it was caused by too much pressure on the throw out bearings and I read that all I had to do was shorten the clutch pedal. After trying this and going for a drive eventually my clutch starts making loud eerie screeching sounds, engaged and disengaged and now I'm to scared to drive home. Help!

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

What kind of clutch?

How old is it? or how much wear do you reckon its got?

Did you ever have it replaced? if so what was done?

I got a brass button clutch (it sux) and its sometimes noisy when i slip it. (grindy whine sound).

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6193070
Share on other sites

Im pretty much clueless with the history of my car. So its a throwout bearing problem, but I've been told to replace the whole clutch which I doubt I can afford. Do you know any decent clutch kits for a good price? I dont need anything fancy and clutches are beyond me

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6193177
Share on other sites

Im pretty much clueless with the history of my car. So its a throwout bearing problem, but I've been told to replace the whole clutch which I doubt I can afford. Do you know any decent clutch kits for a good price? I dont need anything fancy and clutches are beyond me

If it's the throw out bearing, I wouldn't think the whole clutch needs to be replaced. While it's apart though, it would be recommended to do anyway depending on a few things like wear, power output, prospective future modifications etc. Just don't let someone upsell you something you don't need lol

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6193615
Share on other sites

The first guy I called today told me to replace the clutch, something like 'because the gearbox has to come out anyway'. Not exactly helpful. Do you know any good places that can give me a good verdict on whether I have to replace the whole clutch or just the bearing?

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6193719
Share on other sites

what the hells an esp?

hahah do you know their details?

6244 9999, they're in QBN on Gilmore Road (just off Canberra Ave). It's where I had all my engine work done.

To be honest, the "because gearbox is out" is semi-logical. Labour for most general workshops on a gearbox removal and install is kinda steep, so if you're only running a standard clutch or if it's getting warn out, it really is a reason to do it now to save the couple of hundred dollars labour having to remove the gearbox next time when it DOES die in the ass

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6194012
Share on other sites

Exedy triple plate is what I'm running it's good and stiff

He's running a stock N/A, utter overkill and he doesn't need it stiff and hard, just a normal clutch feel.

Any of the heavy duty organic clutches should be fine. Jim berry clutch's are also very good as he cutom makes it to what you need, but again over kill for what you need. Exedy will be fine, don;t get sucked into the button plate, no need for a N/A.

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6194105
Share on other sites

Noo.. thats the kind of thing ive got.

Its no good, i dont know why people would fit a clutch that doesent slip properly.

I didnt fit mine it was on the car.

See on just jap the pbr oem replacement, it has a circular friction plate. Like that but get the heavy duty one, its like the standard one just a bit stronger.... perfect.

Dunno who makes one for you.

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6194179
Share on other sites

Noo.. thats the kind of thing ive got.

Its no good, i dont know why people would fit a clutch that doesent slip properly.

I didnt fit mine it was on the car.

See on just jap the pbr oem replacement, it has a circular friction plate. Like that but get the heavy duty one, its like the standard one just a bit stronger.... perfect.

Dunno who makes one for you.

http://justjap.com/store/product.php?productid=17236&cat=522&page=1

that one? out of stock

seems like nothing has worked out for me at all this week

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6194300
Share on other sites

I might be able to take a look on Saturday/Sunday.

BTW, RB20/25/30 clutches are all the same (except maybe the 30ET). I don't know why manufacturers list different part numbers.

You would most likely only want a organic face, I don't think they come in a puck configuration. I'm sure I heard ceramic faces should avoid slipping or they will be not useable and can not be recovered.

Troy is right, if the clutch is in good condition, why waste money buying another clutch. Just buy another bearing, if the mechanics say you need a new one (after inspection) you can get exceedy kits locally and they should be able to get trade price.

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6194694
Share on other sites

When the gearbox comes off you can see how thick the friction plate is (how much is left like brake pads).

Even if there is an inspection hole you probably cant see how much is left,

excl.gif BUT if you can see it you will be able to make a decision whether to buy a new clutch before the box comes off, heaps better. So try hard to look. Its worth it.

Putting it in yourself is difficult because you gotta lift the car high and the box is heavy and you need a clutch aligning tool (gearbox input shaft)

I love to DIY but this job is a pain and if you need the flywheel machined etc... too much hassle, maybe you should get a shop to do the work AND get the clutch and all that.

Its just gunna cost and your gunna have to pay.

PS: go over your adjustment one more time and really make sure its right.

Link to comment
https://www.sau.com.au/forums/topic/388535-help-my-clutch/#findComment-6195389
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...