Jump to content
SAU Community

Recommended Posts

Hey,

Bare with me here.

A brand new set of LIMITED EDITION GT500 LMGT4 18x9.5 +12 in Gunmetal Grey.

Come with everything they would brand new.

- Rays Wheel Covers

- Paperwork

- Centre caps

- Black Valves

2005 Build date, as I believe they all were.

The boxes have seen better days. But they are still there, as part of the whole idea.

3 Boxes have been opened, the fourth has never been opened. Sealed for the collectors.

As most of you would know, Nismo have discontinued the LMGT4 line, so getting the standard LMGT4 brand new will be close to impossible real soon, if not now.

But, forget about that. These GT500s were discontinued years ago as they were a Limited run, so even then they were hard to get.

Trying to find them, brand new, just as I've got them. I believe would be even harder. I'm not even sure if Nismo ever kept a set in their factory, untouched.

I am torn between the beauty of the wheels therefore wanting to use them and how rare these things are and should be tucked away and forgotten.

These may as well be a Collectors Item.

Considering all the above, plus the personal research you may undertake to understand.

I am looking for:

$5500

To some outrageous, to others hopefully not.

Please pm me to discuss.

Postage, is very simple, as they are so light and already boxed. So you guys just have to setup your courier to pick them up. Or personally pick them up. I don't want to see them go missing.

On another note, If I sell my Volk 19x9.5 +17 GT-F first. I most likely will be keeping LMGT4s for a while.

Click for Volk 19x9.5 +17 GT-F

Please don't ruin the thread. Please pm me with any concerns.

Other than that, genuinely interested people, please contact me.

Sorry in advance for the amount of pictures below, especially of the ugly boxes, but its the way I like to do things, so the buyer does not see any hidden things.

If you need any other photos, just ask:

ac3f6df2.jpg

a7ea5b5e.jpg

a9c4d78a.jpg

b05de724.jpg

3627a1c4.jpg

a8bb8a0a.jpg

IMG_0142.jpg

e3b9b24b.jpg

023afbcb.jpg

b49c5e61.jpg

71fa8f83.jpg

332d90df.jpg

IMG_0148.jpg

b73e1966.jpg

593df4f0.jpg

1373680d.jpg

0a3f1ce4.jpg

0dae992e.jpg

b769b19a.jpg

dc108d4c.jpg

fdfef0ee.jpg

4ed7ac4e.jpg

0ceed68e.jpg

8b189823.jpg

IMG_0163.jpg

worth every cent. can probably sell them back to the Japanese for what you're asking. It's not far off what they're asking for a clean second hand set over there.

  • 4 months later...
  • 7 months later...

Dear Simon.

i am ask you to return the stolen wheel that been steal at wharf few years ago.

i have all the copys of your SAU pages and phone number and all the contacts/car rego number/email address/post address/blog address.

All the information already reported to federal police. this is the matter for the stolen wheel from the wharf.

" Nismo Limited edition wheel "

you know what i mean about "stolen wheel"

will give you 7 days to return.

You can pm me or reply me here.

Edited by 33apx
  • 3 weeks later...

Oh and Terry - thread is locked and posts not removed because I've seen the photo's of the boxes...

Now to me 33apx appears to be telling a very true story here. However this is not a SAU issue as such, and will be dealt with the law in due course - however any buyer should note there is an investigation going on into the wheels.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...