Jump to content
SAU Community

Recommended Posts

Hi everyone,

It's time for another group buy. This will be the last one for a while as I will be getting married quite soon and taking some time off for the honeymoon!

I'll keep this buy open for 1 and a half weeks (closes Feb 1st). I will be running more after this one, but the wait will be approx 2 months after this so get in now.

I now have a few new products for sale. There has been slight price increase as the price of my materials has gone up. I have tried to absorb some of the costs, but I have passed on what is reasonable to cover material costs.

1. C34 Stagea passenger side sub enclosure covered in grey auto carpet - $210 + $10 for terminals installed + approx. $30 shipping if required (local Adelaide pick up available)

2. C34 Stagea A pillar gauge holder to suit a single 52mm gauge black gel coat finish - $60 + $5 for hole cutting + approx. $8 shipping if required

3. C34 Stagea clock replacement dual 52mm gauge holder black vinyl finish, as close as possible match to interior - $80 + $8 for hole cutting + approx. $8 shipping if required

4. C34 Stagea steering column gauge holder to suit a single 52mm gauge black gel coat finish (better photos will be posted later) - $80 + $5 for hole cutting + approx. $8 shipping if required

I will be looking at building an enclosure for the drivers side and the M35 Stagea but as I have time restraints and a wedding coming up soon this is on hold for the moment. I'll let you all know as soon as it's ready to go.

Custom parts can be made for other cars, PM me for info / pricing and I'll see what I can do.

Thanks for looking, PM me for any info

Pete

post-85092-0-90964000-1327221149_thumb.jpg

post-85092-0-07067600-1327221163_thumb.jpg

post-85092-0-59127600-1327221266_thumb.jpg

post-85092-0-40633300-1327221326_thumb.jpg

post-85092-0-48055100-1327221610_thumb.jpg

post-85092-0-22600400-1327221350_thumb.jpg

post-85092-0-99086700-1327221370_thumb.jpg

post-85092-0-30652200-1327221387_thumb.jpg

post-85092-0-46723300-1327221398_thumb.jpg

Edited by Fgjoh

bugger, ill be waiting for next group buy for the drivers, was hoping that they would have been ready for AJD if i entered. but guess ill have to wait. but good luck with the wedding. nd the honey moon.

Plans for the M35 enclosure will be on hold for a short time

I Could start the plug for the gauge pod as this is a small item, if your willing to drop off your A pillar trim i can get a start on it

PM me if your interested

Any chances in producing a 52mm triple gauge A-pillar holder for a series 2 stagea like yours with cream interior trim?

Went and picked up my sub enclosure today.

What a ripper! Extremely happy at Pete's work and grateful for the effort he's gone into making these.

Thanks a ton Pete; you've done a cracker of a job.

Just one thing to bear in mind re: sub enclosure, if your sub has a double stack magnet, it will not fit without some sort of spacer :( Figured this out yesterday when i went to fit mine >_<

I'll need to make up a ring spacer about an inch think go give myself enough room. Will head to Bunnings this arvo to get some wood.

thats a bloody big sub :worship:

did you want me to send some offcut of the carpet so the spacer will match

Sure.

It's a decent size sub and the magnet is about double the normal thickness.

I've got the wood, now I just have to draw it out and then get the FiL to cut it round.

Once done I'll bolt it all together and see what it looks like and take some picks.

Edited by Cowboy1600
  • 2 weeks later...

i have my pod getting covered with vinyl will put some pics up when i get it back.

i had to send it back to them as they got a apprentices to do it and he put a nic right near the front and the gauge was not able to cover it.

shame it was good other wise

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...