Jump to content
SAU Community

Palm Beach Night Cruise To Kick Start 2012- This Saturday Night, Jan28Th!


Recommended Posts

Hey guys, I think it would be interesting to see some skylines attend this.

DATE: Saturday Night, January 28th

TIME: from 7:45PM

MEET: P6D @ Olympic Park (Cnr of Parkview Drive & Australia Ave)!

WE LEAVE: 8:30PM

Cruise Route:

1. LEFT onto Australia Ave (heading toward Home Bush Bay Drive)

2. At the roundabout, TURN LEFT to merge onto Home Bush Bay Drive.

3. Follow Home Bush Bay Drive to Lane Cove Rd.

4. MERGE RIGHT/TURN RIGHT onto Epping Rd. (follow Signs for Lane Cove/Sydney)! Watch out for 'Pacific Hwy' in 5.1kms as we are turning there... STAY IN LEFT LANE!!!!

5. KEEP LEFT & Turn LEFT onto Pacific Hwy (Sings for Chatswood/Newcastle/Crows Nest)--> DO NOT GO DOWN TOLL WAY!!!

6. In 1.6Kms LOOK FOR Boundary Rd.- Sign for DEEWHY/Manly

7. Turn RIGHT @ Boundary Rd. & follow this to Pittwater Rd. as it turns into Warringah Rd.

8. TURN LEFT onto Pittwater Rd.

9. Follow Pittwater Rd. down through Narrabeen, Mona Vale, Newport, etc. & you will eventually come to PALM BEACH (Parking is next to The GOLF CLUB)

PLEASE KEEP NOISE (Reving, Engine Noise, Music, etc.) TO A MINIMUM, SHOW SOME RESPECT FOR THE RESIDENTS NEARBY TO THE GOLF CLUB & IN THE AREA!!!!

Facebook event link

I'll be going and as you can see there's a whole heap of others as well. Hopefully we can gather some SAU? :D

Kind Regards, Serk

Not yet mate going to see him tomorrow id say hoping to have it sorted by end of the week though

I dunno where anything is in Sydney lol

Hows your car goin Mick_o

Yavuz sort that sh!t or what?

You could also go through McCarr's Creek from Mona Vale Road. Will spit you out at Newport, turn left and you're on your way to Palm Beach. Lots of twisties.

Is it still double demerit points this Sat?



  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...