Jump to content
SAU Community

M35 Cruise Control And Trip Computer

Aaron S

By Aaron S,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Aaron S Enthusiast

Aaron S

Posted
Posted

My M35 has what i think is factory cruise it is in the steering wheel etc, however when i turn it on it beeps at me, but doesn't work.

the 2nd issue i have is the trip computer/economy info in the pop up screen doesn't work.

i though maybe they both recieved their signal from the same sensor or something.

would appreciate anyone's input..

Cheers

Aaron S Enthusiast

Aaron S

Posted
  • Author
Posted

Throw a pic of your grille up on the forum, that will either confirm or eliminate the existence of factory cruise.

Has your car had its instrument cluster changed?

i don't know, i haven't long had it, and only registered it last week. however there are 2 types of cruise radar aren't there? there is the radar looking thing behind the grille, and then there is the radar in the centre of the grille?

this is the best pic i have at the moment

post-12375-0-48066200-1327736006_thumb.jpg

zei20l Grand Master

zei20l

Posted
Posted

it has radar cruise!

try cleaning the black square around the nissan badge.

if all of the information is showing up as stars, then someone has swapped out the instrument cluster for a non-navi one.

if its showing something else, then there is another issue.

i have a spare navi instrument cluster if you want it, got 106k on the clock

Aaron S Enthusiast

Aaron S

Posted
  • Author
Posted

nothing comes up on the cluster at all, it just throws one beep

how does changing the cluster affect it?

there are funny scratches all over the "radar" section, is it supposed to have a badge?

any clues on the trip computer info?

bigkevracer Grand Master

bigkevracer

Posted
Posted

Aaron, there were two (or at least two) versions of the cluster. One for cars with the TV screen, one for those without.

If you've got a cluster for a car without the TV screen, it won't display the economy data, just stars. If you've got the right cluster, economy data will work fine.

I think the part numbers are on here if you want them, I know the Nismo one is. Otherwise I'll pick up my spare cluster tonight and get you the part number.

  • 2 weeks later...
Aaron S Enthusiast

Aaron S

Posted
  • Author
Posted

ohh right i understand, are the clusters difficult to get out? i will have trouble changing my cluster as no one will have one even close to the amount of km's i have...lol however that would make sense beacuse my car seems too clean for the km's it has on it.

would be great if you could give me that part number ryan, then i can confirm if that is what is wrong.

as for my cruise control, i found that the fuse for the radar had been removed, so with that in it works great.....for about 5 mins and then it disengages/ turn the car off, then go again.....and it works again.

any ideas........

Cheers

Aaron

Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

as for my cruise control, i found that the fuse for the radar had been removed, so with that in it works great.....for about 5 mins and then it disengages/ turn the car off, then go again.....and it works again.

any ideas........

Cheers

Aaron

Try cleaning both sides of the radar lens. That's most probably why the fuse was pulled. Is it every 5 minutes or more random. Mine shuts down on a bend if it sees an on coming car also.

joshm35 Veteran

joshm35

Posted
Posted

ohh right i understand, are the clusters difficult to get out? i will have trouble changing my cluster as no one will have one even close to the amount of km's i have...lol however that would make sense beacuse my car seems too clean for the km's it has on it.

would be great if you could give me that part number ryan, then i can confirm if that is what is wrong.

as for my cruise control, i found that the fuse for the radar had been removed, so with that in it works great.....for about 5 mins and then it disengages/ turn the car off, then go again.....and it works again.

any ideas........

Cheers

Aaron

Howany k"s you got on the clock mate. I have a oem navi cluster with 148### spare

Aaron S Enthusiast

Aaron S

Posted
  • Author
Posted

iv got 170 on the clock and it's an rx

where is the part number located, ie how much disasembly is required?

as for the cruise control as far as i can see so far it is a time thing, of about 5 mins.

even if you aren't using the cruise control, but it is on, it will deactivate after the 5 mins, this is made obvious by sounding the same beep as it was before when it had no fuse.

where are you located josh?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • MBS206
      Most women will agree that parking is the most taxing part of driving

      By MBS206 · Posted

      It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...