Jump to content
SAU Community

Recommended Posts

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

Well Im going to add my two bobs worth...

I have got a PST carbon shaft in my GTR R34 it is the best there is.... you get what you pay for.. you want to go lighter then depending on power you will be buying another one as it will break...

I bought a ACPT shaft and I broke it in a week, it was shit, then they sent me another one as replacement it was suppose to be the 1200hp one, I could not even drive the car above 40 klms/Hr the vibrations were that bad, I rang them they said it had been balanced the service was piss poor and I was pissed off, so I sent it to a engineering shop to get rebalanced. So another $600 for the rebalance and it was ok... I Will never by another one from ACPT they make them for trust, nismo and all the other Jap brands.. they are crap.

By this time I put a Holinger in my car so I spoke to PST drive shaft in the US they custom made one and it is awesome.. good to talk to and the price was very reasonable, it will be better now the Dollar is $1.06 The gearbox will break before the shaft will.

Dont pm me asking stupid questions on the weight, cost or where do you get it, do your research as I did.

Such a helpful guy you are

:thumbsup:

Trent I also have a PST carbon shaft in my car and have fitted one to another car that you would know fairly well. Sold one to another guy and have never had a complaint from him. I also have another one here waiting to be fitted to another car currently in the build.I would recomend them as they were good to deal with and where reasonably priced individually but are flexible on price if you organize a group buy. Give me a call if you want contact details.

Just spoke with Mark at PST (sorry Dazmo, too early to call you).

Price is US$1099 so nearer AU$1025 with the currency around 1.08.

3 1/4" carbon tube which includes joints on each end, ready to bolt in to your car. Weighs around 12 lbs = 5.4kg.

rated to 1000 ft lbs of torque (1355 nm). Said he could make one rated to 1350 if need be for an extra couple of hundred bucks.

shipping likely to be around $150 mark.

Edit:

Torqline shaft failure load in excess of 4000nm.

I know which one i want. just need to find the extra $$$.

Edited by tk80

Just spoke with Mark at PST (sorry Dazmo, too early to call you).

Price is US$1099 so nearer AU$1025 with the currency around 1.08.

3 1/4" carbon tube which includes joints on each end, ready to bolt in to your car. Weighs around 12 lbs = 5.4kg.

rated to 1000 ft lbs of torque (1355 nm). Said he could make one rated to 1350 if need be for an extra couple of hundred bucks.

shipping likely to be around $150 mark.

Edit:

Torqline shaft failure load in excess of 4000nm.

I know which one i want. just need to find the extra $$.

My last dyno graph shows 1012.4 FtLb so I'm out for the PST shaft.

If you go Torqline let me know.....

Just spoke with Mark at PST (sorry Dazmo, too early to call you).

Price is US$1099 so nearer AU$1025 with the currency around 1.08.

3 1/4" carbon tube which includes joints on each end, ready to bolt in to your car. Weighs around 12 lbs = 5.4kg.

rated to 1000 ft lbs of torque (1355 nm). Said he could make one rated to 1350 if need be for an extra couple of hundred bucks.

shipping likely to be around $150 mark.

Edit:

Torqline shaft failure load in excess of 4000nm.

I know which one i want. just need to find the extra $$$.

Thats awesome for the price. Will have to look into getting one for the gts-t.

Just spoke with Mark at PST (sorry Dazmo, too early to call you).

Price is US$1099 so nearer AU$1025 with the currency around 1.08.

3 1/4" carbon tube which includes joints on each end, ready to bolt in to your car. Weighs around 12 lbs = 5.4kg.

rated to 1000 ft lbs of torque (1355 nm). Said he could make one rated to 1350 if need be for an extra couple of hundred bucks.

shipping likely to be around $150 mark.

Edit:

Torqline shaft failure load in excess of 4000nm.

I know which one i want. just need to find the extra $$.

4000Nm... using same / comparable testing method?? that's a shitload more. Will be interested to see how they stand up to the torque from the higher-powered RBs, whichever route you decide to take.

  • 2 weeks later...
  • 2 weeks later...

4000Nm "failure load" is different from 1350Nm torque rating. 4000Nm is the breaking point of the Torqline, 1350Nm is the safe output for use of the PST.

What's the weight difference between the carbon and aluminum ones?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
    • I use FCC car launcher. It has an option for different backgrounds, so instead of turning the screen off you can swipe 'up' to a black screen with no background/icons. (mine has the time on it only). It's kinda nice. Also lets you use gestures to say swipe to go to next song, etc.  
×
×
  • Create New...