Jump to content
SAU Community

Recommended Posts

Hi peoples,

I have been surfing around the net for a few hours looking for some answers to help solve my cars poor handling.

Hopefully I can get some answers here! When I mean poor handling, I mean I can feel every bump and grind on the road and the steering feels "loose" and not that stable. My wife's old Lancer feels safer to drive at times!

I have done a wheel alignment, changed the steering rack bushes, changed the tie rod ends, and had the front two tyres changed (they were pretty worn to be honest). However, the car still does not handle the way it first did when I got it (it felt nice and solid - if that makes sense).

I know some people say a simple bump on the road can throw the car's alignment off and cause terrible handling, however is there no permanent solution for this? Do I really need to get this thing wheel aligned every 3 months!?!?! :unsure:

I am now going down the path of getting my front control arm bushes replaced with Nolathane ones and hopefully this solves the "loose" steering feel.

Does anyone have any other suggestions of what else I should look for? I am thinking my shocks/springs are getting old and maybe need to get these replaced too. My mechanic had a look at them and said as there are no leaks they should be fine to continue using. Is this correct?

Does anyone also know if the standard R33 GTR shock/springs can go into the VSpec equivalent?

Sorry for long winding rant and questions. Love my GTR and just want it to handle like one! :wub:

Link to comment
https://www.sau.com.au/forums/topic/390069-poor-handling/
Share on other sites

Just because shocks aren't leaking doesn't mean they still damp the spring motion the way they did when they were new. They do wear out. A proper suspension specialist would be worth talking to about assessing how good they are. I would look at every single bush in the whole car. You'll probably end up replacing a lot of them. The front castor rod bushes are a prime candidate, the front lower inner control arm bushes also. At the rear you could have sloppy HICAS tie rod ends, along with nearly every bush in the rear arms. cheers

Link to comment
https://www.sau.com.au/forums/topic/390069-poor-handling/#findComment-6212691
Share on other sites

Is it like a fat ass boat???? i had that feel.

My GTS-4 which is the same as the GTR at the front needed the whole castor rods, you can get new nismo ones for $300. It felt ok after but i needed to do the swaybar and D bushes and links aswell to make the car feel more stiff when steering. In the end it is just showing its wear and tear. the springs will cause the car to sway like a boat so consider coilovers around this time aswell. ill be getting some in less than a week because my stockies are well over and done.

Everyones going to post up there 2 cents if they feel like it because there are so many way to go about it but it really is the wear and tear feel of a boat that the r33 gets when it gets worn.

Link to comment
https://www.sau.com.au/forums/topic/390069-poor-handling/#findComment-6212780
Share on other sites

"Dead" shocks can induce a harsh ride. I once had a Sigma (company car) that I fitted heavy springs / gas shocks to. It rode better than the "fleet" cars that had crapped out stock suspension components.

Simply test for the shocks - "bounce" the corner of the car. The car should stop bouncing within 1 or 2 bounces.

Looseness in the steering could be due to wear inside the steering rack, causing dynamic toe changes.

Replace the shocks first - good ones, eg Bilstein, Koni. See what difference that makes.

What size tyres do you have?

Link to comment
https://www.sau.com.au/forums/topic/390069-poor-handling/#findComment-6212958
Share on other sites

Simply test for the shocks - "bounce" the corner of the car. The car should stop bouncing within 1 or 2 bounces.

That's provided the springs are not so hard as to make it too difficult to get a convincing result. When the springs are quite stiff, I never feel comfortable pushing down hard enough on the gaurd to get a big enough oscillation.

Link to comment
https://www.sau.com.au/forums/topic/390069-poor-handling/#findComment-6212967
Share on other sites

"Dead" shocks can induce a harsh ride. I once had a Sigma (company car) that I fitted heavy springs / gas shocks to. It rode better than the "fleet" cars that had crapped out stock suspension components.

Simply test for the shocks - "bounce" the corner of the car. The car should stop bouncing within 1 or 2 bounces.

Looseness in the steering could be due to wear inside the steering rack, causing dynamic toe changes.

Replace the shocks first - good ones, eg Bilstein, Koni. See what difference that makes.

What size tyres do you have?

When you push down and let go corner should come up and stop dead (no bounces). Some suspension shops will have a fancy meter they can attach to the car and give you a printout.

Link to comment
https://www.sau.com.au/forums/topic/390069-poor-handling/#findComment-6213339
Share on other sites

Thanks for the responses guys.

I guess defining it like coming close to a fast boat does make sense. A boat in choppy seas! It feels 'ok' on nice smooth roads, but when you hit the tram tracks, it's like white water rafting. I will test the shocks for the "bounce" effect today and see what I get. I am going start with the front bushes and see where that gets me and the work my way to the shocks.

I have the stock shocks/ springs, and considering the car only has done 70,000 kms I assume they should last a bit longer?

Link to comment
https://www.sau.com.au/forums/topic/390069-poor-handling/#findComment-6214194
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...