Jump to content
SAU Community

Recommended Posts

Yuh, but if you have to pay anything for it, you are being ripped off.

Both N2 and O2 are as near as damnit ideal gases. Together they make up more than 99% of typical air. The majority of the remainder is water vapour, which is less of an ideal gas. The difference in behaviour between air filled tyres and N2 filled tyres is really small. Justified in racing classes or in supercars perhaps, but hardly justified in normal cars - even super duper hot wheels brrrrm brrrm vrrmpsh like Skylines.

Nitrogen has a lower coefficient of expansion than air, so the pressure inside the tyre doesn't change as much as it heats and cools. SFA difference on the street. On the track i guess it means you can start cold with a little more pressure, so your cold tyres aren't as mushy as they come up to temp.

If you do put it in and you're somewhat disappointed at the result, try sitting on the ground with your legs either side of the tyre and push the valve right in: you might get a laugh out of it :)

lol wut?

Can't hurt, it just means you get less affected by changes in tire heat

not tru

during many race seasons i had a driver who insisted on nitrogen. so we abliged, the pressure change was markedly higher than air from a compressor.

the ONLY advantage is being able to have repeatable results. having the same air in the tyre each race. it alows for a quicker set up being able to predict a pressure for a given tyre temp. humidity is the factor with normal compressed air. since the atmosphere is 78% nitrogen anyway.

but the fact remains the pressure would raise more with n2.

if anyone has some hard data to sugest otherwise. ie: go out 30 psi with a ambiant tyre temp and come in with 30 psi with a 90 deg c tyre i will donate a leg..

n2 in a road car is the biggest WANK ever. and a complete waste of time. and the n2 has to be from a bottle. and to remove any moisture from the air in the tyre already is imposible. mayby if it was filled and deflated and vacumed 100 times you might get 100%n2 in there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...