Jump to content
SAU Community

Recommended Posts

Due to be time poor and wanting to clear up some space im selling off a heap of good quality parts that have been accumulating for various cars I own but dont have the time to complete at the moment.

Dailey engineering 6 stage dry sump pump

This is used but has been 100% rebuilt and is in perfect condition. Has a CNC machined scavenger manifold with a -16 outlet welded on.

Come with a top shelf Dailey engineering HTD pulley

Asking $1000 with the pulley

Barness 5 stage dry sump pump

This pump is used and has been sitting for approx 2 years. Was run on one of my previous race cars and removed when the car was retired from racing. was flushed with cleaning solvent and filled with WD40 before sitting on the shelf. Comes with a front pulley and does require a new front o ring seal as the last time it was used it had a small leak from the housing seal. ( I have the seal and its easy to replace)

Comes with a quick release scavenger manifold that was modified to suit the RB26

Asking $600

Pair of 996 porsche cup car front callipers

These is in usable condition with no leaks or detrimental damage. They have been used on a race car and the visual condition is indicative of this. Cermaic piston crowns and they come with a set of Pagid pads 50% worn.

They use a 380mm rotor which I may be able to supply at additional cost

Asking $700 the pair

Pair of 997 cup car rear callipers.

Same deal as the fronts but these are in good condition visually and done less work than the fronts.Can supply rear pads for additional cost but no rotors available at the moment.

2x pairs to get rid of $500 a pair

Brand new pair of wilwood Prolite 6R callipers

These were bought brand new for a car I was building but have no time for. They have never been bolted to anything and have never had a pad fitted to them. Perfect condition, boxes are gone but never used the callipers. Stainless steel pistons, backings etc etc.

Asking $800

Full set of rebuilt ohlins shocks

These are the absolute holly grail of ohlins shocks. 4 way adjustable (high and low speed bump & rebound) external resiviour with a separate bump piston.

They have been valved to suit an R34 GTR and have spherical bearing mounts top and bottom. They are used but have not been used since full rebuild and valving was done. These are not a direct fit into anything, more for the serious car builder who is doing a complete custom setup.

Advise on spring choice etc is available to the buyer if requested.

Asking $1800 Ridiculous price for a set of shocks that are worth 8x that new.

RCI fuel cell

Again brand new but never been fitted to a car. Was traded by me for a custom fuel cell in an escort rally car and I intended to use it for something one day but its in the way and must go.

Ill have to check dimmesnsions but it assume 60-70L from the size of it.

Covered in dust needs a good clean up, has always been sealed though.

Asking $200

FG falcone 6 cyl engine and BF 5 speed XR6 turbo box

Bought for a project but cant find time to do it.

Engine had done 30,000Km's and has had some of the timing case removed. I have atomic springs, timing gear and balancer for it. Box is standard, also has bolt on accessories like alternator etc.

Asking $1300 for the whole lot

R34 Skyline GTT rolling shell

Race only R34 GTT roller. Has all windows, pannels and a whole interior thats removed but complete minus seats and carpet.

Has a brand new carbon bonnet, brand new carbon guards (over 1K worth) good headlights, 2 sets of tail lights, 2 boot lids and loads of other parts to go with it.

Selling due to lack of time to do the job

Asking $3000 with all the parts and carbon gear

There is going to be more stuff coming up for sale but for the time being that is all.

Everything is located in sydney, prefer pick up but may post smaller items at your cost.

Low ball offers will be ingnored, decent offers will be replied to.

Photos to come

Link to comment
https://www.sau.com.au/forums/topic/390487-motorsport-parts-clear-out/
Share on other sites

Dailey engineering Dry sump pump

post-20349-0-12875300-1328328346_thumb.jpg

post-20349-0-85186100-1328328782_thumb.jpg

Barness 5 stage oil pump

post-20349-0-33060400-1328328702_thumb.jpg

Wilwood pro lite calipers

post-20349-0-21173100-1328328753_thumb.jpg

Rear 997 cup callipers

post-20349-0-95086800-1328328903_thumb.jpg

996 Cup front callipers

post-20349-0-16618600-1328329002_thumb.jpg

R34 GTT rolling shell

post-20349-0-13181600-1328328439_thumb.jpg

post-20349-0-32529200-1328329042_thumb.jpg

RCI fuel cell

post-20349-0-06145800-1328329064_thumb.jpg

Ohllins shocks

post-20349-0-04044200-1328329118_thumb.jpg

There is also an R32 Gtst rolling shell that id really like to rid myself of. Its a bare roller with doors and front guards, bootlid and no interior.

Has been stripped ready to cage etc.

I want $400 someone come and take it away!

I'll post up dimensions of the fuel cell latter today.

It should fit behind the back seat of a R32. I was planning to use it as a water tank on my transporter but made something else.

Yeah it is Dave.

Pm's asking if I have any other parts will be ignored.

I don't have seats, steering wheels, gearknobs etc etc.

What is advertised in this thread is everything that selling for now.

To be honest I've never even taken the lid off to check......

If it really matters I can check tomorrow and let you know.

I'll take $180 for it if you organize courier etc.

Brad

  • 2 weeks later...

RCI fuel cell I believe to be sold pending payment when I return.

I'll be back in Sydney this coming week and would REALLY like to move the R34 out of the workshop.

If someone is even remotely considering it send me an offer. I do want it and all the parts I have for it gone......

Details for fuel cell payment are on the way to you.

Yes I'm located in Sydney.

No none of the calipers come with any type of adaptor. They double in value when they come with brackets to suit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...