Jump to content
SAU Community

Recommended Posts

congrats it looks like you baught a 34 gtr.

you can fit 10.5 inside your guards. it depends if you like concave. 18s have concave. 19s have more dish and straighter spokes. search around the net youl find diff wheels

I have 19x10.5 +22 sl's on my BNR34 with 275/30 tyres

Great fittment, only very light scrubbing on full lock on uneven ground (just avoid full lock where I can)

Any further info just let me know,

Cheers,

Anthony

Heres some pics of mine, i know i had alot of trouble picking mine due to not wanting excessive scrubbing but still filling the guards and getting a flush finish. probably would rather +15 than +22 like mine, but i couldnt pass up matte black ones as i believe there not easy to get a hold of.

gallery_85191_4683_315198.jpg

gallery_85191_4683_162619.jpg

Hope that helps.

Cheers,

Anthony

Thanks Anthony, so yours are +22? Why rather +15? Yours look fine. I didn't realise the SL's come in 18" +22

Yea mine are +22 but are 19", not sure if they are abit different becasue they made a small run of matte black ones?.. they came from OTR and they also had a 19x10.5 +12 set that sold before i bought my car, i would have picked +15 just because its slightly more aggressive, but at the same time may have been slightly less user friendly than +22. in the end its only 7mm, and i am very happy with the +22, looks really good imo.

Cheers,

Anthony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...