My Insane 18" Custom Work Mersters Up For Sale!

[The Stag Wagon]

Sorry if this drags on!!

Up for sale today was my key to the very unique look i was aiming for with my beloved Matte White Supra

A set of custom Chartreuse Yellow Work Meisters S1, all wrapped up in Kuhmo KU36 semi slicks

They were originally bought in average condition, but once i decided on the look i was after, they were sent off to Import Monster to get the royal treatment done.

It took about 5 months total to get the finished product, as new outers (painted dish) were sourced and machined to bold up to the centers and the inner section of the wheels

Dimensions of the rims are as follows:

Fronts

18"x10.5", offset is unknown

KU36's have roughly 70% tread left

Rears

18"x12", offset is also unknown

KU36's have roughly 10% left (only put these on to get from a to b, but the wheels did not fit)

One of the front wheels has a small section of paint chipped off due to my careless brother shifting them about :@

Ill stress it now, if you plan on fitting these to a stock bodied supra, i highly suggest you get yourself either a slight wide body or over fenders of some sort for the rear

When i test fitted them to my supra (stock guards) the fronts seemed fine, but the rears were my problem

In my opinion these are as awesome as f**k. (pardon the french)

I also highly advise test fitting before purchase, which can be arranged with me

Any interstate buyers, unless you are prepared to make your car fit the wheels, there is not much i can do in terms of test fitments

These wheels cost me a total of 5.7k in the end (purchasing, refurbishment, paint, assembly and tyres)

They have not been used since being assembled apart from two wheels being test fitted to my supra

I am looking for $5,000 as they are

It may seem like a lot to most people, but consider this

as far as i know, you can only purchase new Meisters with a maximum of around 10.5-11"? (correct me if i am wrong! )

and again as far as i know, they will cost a fraction over $4,000 for a set without tyres

These are very different and again have freshly been refurbished and never used

Words nor pictures cannot even begin to explain how damn sweet they look in the sun light.. you really have to see them in the flesh!

ill let the pictures do the talking

These stickers are also included in the sale, didn't know if i wanted to put them on or not

Reason for sale, my Supra will be sold soon to make room for a Stagea, and these are way too clean to use on my z20 drifter, so they must go!

I can be contacted on 0423 985 five seven one, and am located in VIC (Caroline Springs)

any questions, ill so my best to answer! these will be advertised on few forums so it will be first in, best dressed!

Cheers

Ken

[The Stag Wagon]

For those asking, no, its not lime green.

[The Stag Wagon]

I should mention that the price is also negotiable of course

[UWISSH!]

sexy rims mate, gl with the sale

[relyt]

what size are the tyres perfect stretch .

thanks

[The Stag Wagon]

cheers chris

ill find out both tyre sizes when i get back home later this arvo relyt

[180Roman]

I think you will have better luck selling the wheels if you measure the offset with a ruler even if it is approximate it will only be like 1-2mm error

there are guides on how to do it all over the internet

also what are the disk spec on the faces, big brake clearance or pretty low disk?

iirc Meisters are available up to 18"x15" size from the Work site

[The Stag Wagon]

just did a quick google search about diy offset measurement, ill have a crack at it tonight

What would you be referring to when you say 'disc spec on the faces'? i wouldn't have a clue

In regards to BBC, i am not entirely sure,

when i originally purchased the Meisters in their original form, they came off an RZ supra with big brakes, considering the facing is still the same id say it should still clear supra big brakes,

But this of course is SAU, so that's pretty much useless

Id be more than happy to test fit to any skylines, s15's and etc with big brakes! It would be helpful to know if they would clear for you guys or not

Cheers

Ken

also ill remove the section about the new work wheels, as i have been mistake

Cheers Roman!

[alwaysdreaming]

these are mental! make ur car fit them, they will look awsome! tried getting my wheels painted in same vibrance but orange and the shop couldnt do it

[The Stag Wagon]

that was the plan! but a m35 stagea is such a better option for me so the supras going!

Its very very tricky with colours as vibrant as these to do it, ill be doing the same theme hopefully to my z20 and my stagea when it eventually arrives!!

For some reason, i am un able to edit the first post, so ill put the offsets and tyre sizes here

If a mod is reading this, could you please edit the topic for me?

anyway they are as follows

FRONTS, -27 offset

TYRES, 235/40ZR18 95W

REARS, 0 offset

TYRES, 265/35ZR18 97W

Thanks guys!

Cheers

Ken

[Import Monster]

Ken I reckon the fronts are more likely to be +27 not -27

[Owgasm]

Agreed. Not agressive enough on the supra to be -27.

[89CAL]

Offsets should be stamped somewhere on the wheel. mine are stamped on the inside of the spokes

[The Stag Wagon]

ah whoops! yes +27, pressed the wrong button

Callan, the wheels have been re-furbished and widened, so offsets have changed

Price Drop

4,800

[The Stag Wagon]

Good afternoon Saturday shoppers!

Price is now 4,600

[The Stag Wagon]

and will now take 4,400

is there a way to edit the first post at all?

[The Stag Wagon]

got the net back after a week

PM's have been replied to

Price drop to 4,000

[Run-It-Hard]

ah whoops! yes +27, pressed the wrong button

Callan, the wheels have been re-furbished and widened, so offsets have changed

Price Drop

4,800

If they have been widened and all that jazz, whoevers done the work should know what the offsets are. It would help with your sale.

[?UESTLOVE]

Just offering my Personal experience here. Those fronts look to be something like 9.5 +24, and if it clear Supra big brakes, it will clear GTR/S15/[insert datsun] big brakes, and 6 Piston Alcon/Grex calipers, as Supra brakes are actually wider than them.

This is with 19 x 9.5 +20

The rears, these were my 19 x 11 +18 SSR on my Supra...which look ssimilar to the fitment on your Meisters. Hope that helps man.

[The Stag Wagon]

damn ive always been jealous of your gorilla

thank you though!

anyway, yeah it is a bit of a pain not having specific offsets, but i am doing what i can, the offsets i measured are a few posts up anyway.. shame i cant modify the first post

but anyway test fitment is something i definitely suggest to any potential buyers as previously mentioned

Cheers

Ken