Jump to content
SAU Community

Recommended Posts

Hey Fellas, i recently had some trouble with my coilpacks, the car was drinking lots of fuel and would get chocked up in high revs i was also getting about 300km per tank of fuel max, i changed the coils to spitfires and the fuel improved to 400+km per tank, and the performance was incredible, so smooth and i can squeeze so much more out of each gear.

now!. i think i can improve my fuel consumption and performance hopefully by changing the injectors. right now i have stock ones and the area around them always looks a bit moist as if they are leaking or something of that nature.

i have no idea about injectors tho and the whole 300cc, 500cc, 1000cc,

What is the stock CC for the R33 s2?

What will give me good fuel economy and performance?

Any good brands?

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/391220-need-some-info-on-injectors/
Share on other sites

Stockers are 370cc. You do know if you go bigger injectors you will need an aftermarket ECU and a tune to suit (1000+).

If they are leaking from the rubber o-ring, you are better off replacing those o-rings.

yeah i have replaced the O2 sensor, didnt seem to do much tho. o-rings and a clean sounds good, since the other options are a bit expensive for now.

i want to do a NIStune but its a bit expensive, anyone had it done??

well i wasnt sure thats why i asked, i know a while back i got quoted around $1300 for a NIStune, so i thought since the coilpacks made such a big diferance at low cost, perhaps better injectors will help also

well i wasnt sure thats why i asked, i know a while back i got quoted around $1300 for a NIStune, so i thought since the coilpacks made such a big diferance at low cost, perhaps better injectors will help also

A good tune is probably the BEST thing you can do for your car. You'll get more power, better drive-ability and a LOT better fuel consumption. I'm making almost 400rwhp and I still get 550kms to a tank. Best I ever got when my car was stock was about 350.

Injectors will do the opposite, if not make your car undriveable without a tune. As Bob said, better off just getting your injectors cleaned and replacing the O-rings. Still highly recommend getting a tune though.

Damn! 550km @400rwhp thats worth a look into, did u get a tune up or get the NIStune thing?

I think you need to understand what people here mean by "tune". It's not like the old days when a "tune up" meant the mechanic would fiddle with all the mixture screws and linkages and pump jets whatnot on the carby, clean/file/replace and set the points and so on. All the little work that made the car's various control systems (such as they were) go back to being in proper spec. In those days your car could get a new lease on life after a tune up because over time all those things would vibrate and wear and block up and so on until they weren't working right.

In a modern car, most of that doesn't happen. Plug leads and plugs may age out and need replacing, throttle bodies might benefit from a clean out, but there's not a lot else that you can do that is akin to a "tune up" from the old days.

BUT......a "tune", now that's a different story. Nissan ECUs aren't reflashable off the factory floor (like many other cars these days are). So the minimum way to make a Nissan ECU tunable is to replace the chip in it with a Nistune board that effectively turns the ECU into a fully realtime programmable ECU. You can do it to pretty much all of them, except the R33 ECU, which you have use an ECU from another car for and do some fiddling. Or, you buy an aftermarket ECU. When you tune the ECU, either just retuning on a stock engine to take out all the extra fuel that the Nissan tune has in it (and make the ignition timing more agressive) or do a complete tune to suit a modified engine, you will make the car use the minimum (safe) amount of fuel for the work it has to do. That's all.

yeah i know what a ture is, its much different from me taking things appart on a weekend and screwing around just because its fun, what i was getting at was did he get the nistune programed into the ECU since it is fairly new or did he go with the regular tune and dyno that every jap car gets whether its a nissan or subaru etc

what i was getting at was did he get the nistune programed into the ECU since it is fairly new or did he go with the regular tune and dyno that every jap car gets whether its a nissan or subaru etc

I still don't think you understand. There is no "regular tune and dyno that every jap car gets whether its a nissan or subaru". What did you mean by that?

And more to the point....he's making 400rwhp.. Of course his car has been tuned. That's not going to happen on an untuned factory ECU now, is it? Whether he has a Nistune conversion in his ECU or he's got an aftermarket ECU really doesn't make any difference to the fact that one way or another, his cas has been "tuned".

Edited by GTSBoy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...