Jump to content
SAU Community

Recommended Posts

For Sale $1500 firm

17x8.5 and 17.5 Volk rims for sale, with Dunlop Formula R tyres.

Perfect for saving your street tyres at the track :D

Full details and photos here: http://www.hgeconsulting.com.au/cheatertyres/

Team Trackday, here's your chance....

well.....they all *used* to be roadworthy lol

The formula rs are still road legal, I always drive to and from the track on them to save stuffing around when I get there. The tyres currently on the rims need to come off tho...

100% incorrect Al. As per the web page, the tyres on the rims are dead. The rims come with Dunlop Formula Rs which are about 80% new, and are worth $1800 on their own.

I can swap the formula rs onto the rims but its going to cost me $80, so for $1580 I could have the formula rs fitted first. I just dont have access to a cheaper deal to get them done than retail....

Sorry, I'm not willing to seperate tyres and rims.

sidewaymambo, the rims don't have the offset marked on them anywhere, but they do fit over the standard gtst calipers. And, I don't have my r33 any more so I can't fit them up and check it out. You can come and check if they fit over ur brakes if you like, the wheels are in abbotsford.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...