Jump to content
SAU Community

Recommended Posts

g'day all, my other thread is disorganized and scattered, figured it would be best for me, and anyone interested in the parts to make things easier.

Locations, traralgon VIC 3844

I am parting out a 1994 GT-R, EVERYTHING is going, down to the nut's and bolts and wing mirror's, i'll be posting up pics of part's as they're removed, if your interested in a part that is still on the car, shoot me a PM, or SMS me on 0487111991, if i'm at work a may take a while to reply and i may not answer call's at work

i will be uploading picture's of part's as they're removed, if you need a part PM or SMS me (put your skylines aus name in the SMS)

here's a list of aftermarket part's that are on the car that people may be interested in, PM or SMS me for more details.

EVERYTHING IS NEGOTIABLE, EVERYTHING MUST GO

-RB26, forged eagle rod's, forged CP piston's, 2860-5 turbo's, siemen's 660cc injector's, adjustable cam gear's, receipts for some of the work, most receipts for part's have faded to the point of being unreadable, $9,000 ONO (if sold complete, am willing to seperate part's)

-tien suspension, recently serviced-$600 ONO

-APEXI power FC with controller-$1000 ONO

-NISMO 260km'h dash showing 138.xxx, good cond, no scratches to plastic, everything works-$400 ONO

the part's i have removed ready for sale

-YOKOHAMA ADVAN RS wheel's, 18x10 15mm offset, tires at 40%, are roadworthy, rims in new condition, no gutterrash or damage of any kind (that i can find)-$2900 ONO

-driver's seat small tear (see pics)-$300 ONO

-passenger seat, good condition, no tear's or mark's-$350 ONO

-rear seat, no damage, no mark's-$350 ONO (sold pending payment)

-AC pump, working perfectly-$200 ONO

-KSP full stainless exhaust, 3inch cat, 3.5 inch cat back, 4.5 inch tip, not to loud $450 ONO

-TRUST 100x300x600 intercooler (sold pending payment)-$600 ONO

-Greddy hard pipe kit-$500 ONO

-OEM radiator, no mark's, no damage, no blockages-$250 ONO

-fan belt idler pully and bracket-$50 ONO

-dash suround, good condition, no crack's, bubbles or fading, all buttons and switches work -$200 ONO

yokohama ADVAN RS wheels (pic of each wheel plus ID tag)

rimidtag.jpg

rim4.jpg

rim3.jpg

rim2.jpg

rim1.jpg

driver's seat

driversseat1.jpg

driversseat2.jpg

driversseat3.jpg

driversseat4.jpg

passenger seat

passengerseat1.jpg

passengerseat2.jpg

passengerseat3.jpg

passengerseat4.jpg

rear seat

rearseat2.jpg

rearseat1.jpg

AC pump

ACpump2.jpg

ACpump1.jpg

KSP full exhaust

exhaust1.jpg

exhaust2.jpg

exhaust3.jpg

exhaust4.jpg

TRUST intercooler and greddy hard pipe kit (sold separately, complete pipe kit is here if pieces are missing from pics)

intercooler4.jpg

intercooler3.jpg

intercooler2.jpg

intercooler1.jpg

idler pully

idlerpully.jpg

dash surround

dashsuround2.jpg

dashsuround1.jpg

Edited by ttoks

also, i can freight all item's at buyer's expense, if you have a preferred freight carrier please let me know, coming from 3844.

Edited by ttoks

Hi mate - I'm after the car-side plugs that plug into the neutral and reverse switches on the gearbox posted to 2567. Thanks.

will have a look for it as soon as i get home tonight.

price drop!

apexi pwoer FC-$600

RB-26-$7000 (including turbo's, manfold's, intake plenum, the lot)

NISMO 260KM dash-$300

driver's seat-$200

passenger seat-$250

trust cooler-$500

UPDATE, turn's out i uploaded the pics of the AC heat exchanged instead of the radiator, so here's the pics of the real radiatorwith a price drop! $200

radiator1-1.jpg

radiator2-1.jpg

radiator3-1.jpg

more part's

bonnet, good condition, no dent's, minor scratch's (will come out with a good cut and polish)-$350

bonnet2.jpg

bonnet1.jpg

oil catch can mount in front of battery, price drop to $100! with hoses

engine2-1.jpg

boot lid with spoiler, paint missing from spoiler, boot in good condition, no deep scratches, latch works ect-$300 or $180 each

bootlid3.jpg

bootlid2.jpg

bootlid1.jpg

deposit taken on the following items.

front bumper

steering wheel

ash tray

boot lid.

cheer's.

sold-

master cylinder (still have one left)

both front indicator's

both front guards

wheel arch splash guards (all 4)

Edited by ttoks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't be ridiculous. "2-3 ugga duggas or one Oof. You have to use Oof on tie rods because you can't get an ugga dugga on there." Is not helping the guy at all.
    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
×
×
  • Create New...