Jump to content
SAU Community

Recommended Posts

Still selling more parts off the GTR

Finally after 3 years I have pulled my finger out and up graded suspension bits.

Up for grabs:

Standard R33 (BCNR33) GTR Dampers with unknown brand of 30mm lowered springs front and rear.

In good condition and offers a nice firm ride but won't loosen your fillings going over bumps.

Will be removed from the car tonight if pictures are required.

$200 delivered (AUS only)

Defi BF Series Gauges

Boost, Oil Temp and Water Temp.

Comes with Defi Advance controller and all cabling and sensors.

Amber illumination and in great condition

Comes with all sensors and electrics supplied for installation

$550 delivered (Aus only)

R33 GTR Series 3 Rear Seat

Great condition, no tears or cig burns. Removed from car when roll cage was installed

$75 + freight

Standard R33 GTR Instrument Cluster with triple centre gauges

Great condition, removed for up grade to Nismo instruments

$220 delivered (Aus only)

Please drop me a PM or feel free to TXT me on 0438840407 for further information

Cheers Marty

Link to comment
https://www.sau.com.au/forums/topic/392602-spares-for-sale/
Share on other sites

PM's replied to.

Please note that I am not interested in splitting up the Defi's unless there is a buyer for evrything otherwise its not worth while selling them at all.

Cheers Marty

Link to comment
https://www.sau.com.au/forums/topic/392602-spares-for-sale/#findComment-6248099
Share on other sites

PM's replied and email sent of instrument cluster.

Little bit of interest on the Defi's, please note these are not the Advance series, the original BF series.

These gauges still have up to 3 minutes recording and play back features so you can impress all the bitches with your mad skills and also full adjustment of brightness for day and night illumination through the controller. All daisy chain cables, sensors etc all included. None of these have been cut/lenthened.

Please note that best contact number has changed to 0498001518.

Cheers Marty

Edited by Weapon
Link to comment
https://www.sau.com.au/forums/topic/392602-spares-for-sale/#findComment-6257363
Share on other sites

Another item that I am looking to sell is a very nice sounding RS*R catback exhasut to suit an R33 GTST and GTR (all mounts etc are the same) its a typical Jap exhaust and is 3 and 1/4 inch ID and is as straight through as you can get with no mid muffler. Sounded very nice with the stock twins and even more angry with the single high mount on it.

Is a single piece and can't be split in two like most cat back systems however in saying that the freight from Brisbane when i purchased it was only $70. Being a used exhaust it has the usual road grime on it however is still in great mechanical condition.

$300 plus freight, may be negotiable

Cheers Marty

Link to comment
https://www.sau.com.au/forums/topic/392602-spares-for-sale/#findComment-6258673
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...