Jump to content
SAU Community

Recommended Posts

Hi all its time to part with my gtr but all for a good cause to buy a house so here it goes.

$25000 Neg

The car is a 1989 R32 gtr skyline with a fresh built that Paul from Red R racing put together here are the details.

R34 gtr crank

CP 40 thou pistons with modified eagle rods

Hks oil pump and trust sump with modified oil return and restrictor fitted

Tomei Pon cam type b's and valve springs and retainers

tomei adjustable cam gears

spit fire coil packs

2860-5 turbos with r34 gtr stainless dumps and veil side front pipe and a varex muffler

The car produced 430 hp at the wheels with a Guilt toy tune. There is plenty more left in it with a less restrictive exhaust.

The car is also fitted with 18*9 +15 lenso DR1 rims.

JJR adjustable camber arms front and rear with bilstein coil overs

Top end sterio kenwood head unit, JL splits and JL rears $2000 worth alone come with sub and amp just havent gotten to fit it yet

Viper alarm is installed

there is probably other things i have forgotten to mention but feel free to hit me up

My number is 0434108477 feel free to ring me or txt me.

thanks scottie

post-71662-0-51206800-1329903943_thumb.jpg

post-71662-0-04044000-1329904056_thumb.jpg

post-71662-0-23733600-1329904107_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

List what ecu injectors fuel pump/ system. There is more mods to this car than what u have stated. Having a red r racing engine u know it one of the best.

Nice car and its well worth the low 20s

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6247001
Share on other sites

Sorry like i said alot to list it has and cheers i think i have priced it fairly like i said i am negotiable oh and the motor is 8 000km old

HKS 1000cc injectors bosch 040 fuel pump and a power fc with hand controller

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6247010
Share on other sites

Long engine alone is well worth half the asking price. Plus all the bolt ons someone wil get a good car by the look of it.

I have 2 gtrs if I didn't already or had a spare lump of cash would buy this just to save on the engine hastles of an unbuilt engine or unreliable engine built by some shop that don't know the rb engines.

Paul is one of if not the best rb engine builder in the country in my opinion.

Good luck with your sale ill spread the word of a quality gtr for sale

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6247270
Share on other sites

hi it is running 21 psi atm and the turbos where brand new when the motor was built so they have 8000km on them they also have the oil restrictor fitted in the banjo lines to. goz1llaaa34 yes there is alittle bit of rust i will post some photos for you tonight and interior pics will be put up as well thanks for the interest guys

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6247366
Share on other sites

Thanks mate, does the air con work ?

Hey sorry mate air con does work but needs to be re gassed which i can organise it to be done and here is acouple of interior pics

post-71662-0-70792300-1329986252_thumb.jpg

post-71662-0-83735900-1329986274_thumb.jpg

post-71662-0-04797800-1329986392_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6248436
Share on other sites

Could you please tell me where exactly are the rust spots? So that I will have a clue. PM me if you like...

heya sorry mate i completely forgot about that here are a couple of photosof the rust. the rest of the body is straightas with only like 2 noticeable dints. There no rust in the sills or under body at all. I was quoted $3000 for the rust repairs with all the windows removed rust plated and the roof and rear quarters repainted. Other than that and the front seats being average the car is in very good condition and i forgot to add it has a Jim berry single plate custom clutch also which i would have to say is the best clutch i have driven.

post-71662-0-02653100-1330332118_thumb.jpg

post-71662-0-73263800-1330332149_thumb.jpg

post-71662-0-84609200-1330332171_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6253182
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...