Jump to content
SAU Community

Recommended Posts

I'm looking for feedback on whether to change rear LSD on r32 GTR to an aftermarket 1.5way or similar.

Car will be used "exclusively" for circuit racing/track days etc. (not road registered)

from what i've seen, its generally agreed front diff should be upgraded to 1 way or 1.5way of some sort, but it seems lots of people leave the rear standard. I'm thinking of changing the front to quaife 1.5way and whilst i'm at it, would like to know if this is a bad idea.

But Mainly, has anyone changed the rear LSD to nismo/cusco/kazz and if so was it better?

Link to comment
https://www.sau.com.au/forums/topic/393144-standard-lsd-vs-aftermarket-on-gtr/
Share on other sites

3 days and you come over all snarky because no-one replies?

Point 1) It's not all hidden from you. Do a search.

Point 2) Quaife diffs are helical types. There is no 1/1.5/2 wayness about them.

Point 3) Generally the helocal diffs are a bloody good thing in the front, especially on a track car.

Point 4) If it is track only just man up and put a 2-way in the rear.

3 days and you come over all snarky because no-one replies?

Point 1) It's not all hidden from you. Do a search.

Point 2) Quaife diffs are helical types. There is no 1/1.5/2 wayness about them.

Point 3) Generally the helocal diffs are a bloody good thing in the front, especially on a track car.

Point 4) If it is track only just man up and put a 2-way in the rear.

Point 1: thanks for the reply, "quaife in the front, 2 way in the back it is", i wont have my manhood questioned.

Point 2: i didnt know it was meant to take 3 days, i thought nobody like me, my bad, sorry

Point 2: i didnt know it was meant to take 3 days, i thought nobody like me, my bad, sorry

It's possible that they don't like you, but I wouldn't let that worry you. But seriously, your question had been asked and answered before, so a bit of passive ignoring by the crowd can serve as a lesson to use the search function just as well as the usual R31Nismoid post.

^ it's automated :P

Anyway you can just shim up the rear diff if you want which is what a lot of people do when leaving it "standard", or put an aftermarket centre in.

Most people do the front with aftermarket as the Nismo etc are stronger. Last thing you want is a diff to break and take the sump and god knows what else with it.

Depends on where you want to go with costs as to what option you pick. Shimming up will cost around $300-$400 if it's in good condition. So quite cheap.

on the track, when we are talking aboput rear diff, what is the BIG difference between 1.5way and 2 way, i here 2 ways are better for drifting but WHY?

its easy to get my car into power oversteer out of tight corners, it a nice oversteer that is progressive and easy to control and it doesn't seem to snap back and is lots and lots of fun, but this gets through tyres real quick,

which one helps the car hook up out of corners better and do either of them cause understeer

depends on how many shims you put it....... mine is shimmed up with the biggest and its locked... jumps around chirps in car parks makes noises and generally attracts attention when trying to park :whistling: yes you can shim it up to different values and acheive nice through to near locker like mine.

1.5 way = locked on acc so whenever the gas is on the diff is locked....... when you depress the acc pedal the diff will unbind and return to a half locked state hence the .5 (half locked)

2 way = locked on acc and then locked on decel so it is kinda the same as a locker HOWEVER if you ajust the acc pedal you can acctually make the diff release as the tourque plates the diff arnt bound togeather, these are good for drifting because they are predictable and you are spending most of your time drifting wanting both wheels to spin a condition that unbinds the diff (stock diffs unshimmed) will stuff your corner and well your day of drifting :(

2 ways are for this reason no considered good for the street to the untrained like a locker will induce understeer, and over steer and when down gearing or decel oversteer that usually scares people.

for the GTR i would think that a 1.5 way front and a 2way in the rear would be a good setup i have driven in cars with lockers shims kaaz tomei and nismos...... my pick of the bunch the tomei .... but cost value the shimmed stock diff is great :cheers:

Any LSD, front or rear in any car will tend to increase understeer.  And the more LSD action in the diff the more it will do it.  So a 2 way is not necessarily going to cause more understeer than say a 1.5 way or a 1 way.  What matters the most is the breakaway torque at which the LSD slips.  The tighter the diff, the more understeer it gives.

Also, just a small correction to what Blitz wrote above. He said "1.5 way = locked on acc so whenever the gas is on the diff is locked....... when you depress the acc pedal the diff will unbind and return to a half locked state hence the .5 (half locked)".  What really is the case is that a 2 way offers LSD action on both accel and overrun, a 1 way diff only provides LSD action when loaded under forward acceleration.  A 1.5 way diff offers the same LSD action on forward accel, and some on trailing throttle too, just not as much as a 2 way.  And when he said "depress the acc pedal" he really meant "lift off the acc pedal".

Edited by GTSBoy

on the track, when we are talking aboput rear diff, what is the BIG difference between 1.5way and 2 way, i here 2 ways are better for drifting but WHY?

its easy to get my car into power oversteer out of tight corners, it a nice oversteer that is progressive and easy to control and it doesn't seem to snap back and is lots and lots of fun, but this gets through tyres real quick,

which one helps the car hook up out of corners better and do either of them cause understeer

2 ways lock on acceleration and deceleration

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...