Jump to content
SAU Community

Recommended Posts

Hi all here,s my problem my 4th afm died took the car to a import mechanic he says the problem is that when he plugs into the ecu the car will not give any feed back what so ever so he can't find out the exact problem , afm replaced new panel filter car reads 59 degrees thru it but can't be altered Any ideas please it's driving me madworship.gif

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/
Share on other sites

Hi all here,s my problem my 4th afm died took the car to a import mechanic he says the problem is that when he plugs into the ecu the car will not give any feed back what so ever so he can't find out the exact problem , afm replaced new panel filter car reads 59 degrees thru it but can't be altered Any ideas please it's driving me madworship.gif

Hi Rudi

Was that the same import mechanic that has done all your other work? :whistling:

Have you run an Informeter on your car to see what reeding the car is seeing? That may help to identify what is happening.

Do you know what the specific failure is that is happening to the AFM?

I presume you have tried your faulty AFM on another car to see if it works?

Cheers

Andy

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6255665
Share on other sites

1330480669[/url]' post='6255665']

Hi Rudi

Was that the same import mechanic that has done all your other work? :whistling:

Have you run an Informeter on your car to see what reeding the car is seeing? That may help to identify what is happening.

Do you know what the specific failure is that is happening to the AFM?

I presume you have tried your faulty AFM on another car to see if it works?

Cheers

Andy

Hi Andy No this a different one as last resort ,apparently no info can be read as the car won't allow it.and he had both old and new afm, it's been 6weeks since the last afm pulling my hair out cheers
Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6255928
Share on other sites

1330481678[/url]' post='6255702']

Your mechanic is using a reader that doesnt communicate to our Japanese specific OBD2 port. Very few of the cheaper OBD2 readers do.

Hi Scott will find out need all the help last week Craig put a transco kit in don't want part with the car if I can help it cheers rudi

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6255934
Share on other sites

1330489280[/url]' post='6255934']

Hi Scott will find out need all the help last week Craig put a transco kit in don't want part with the car if I can help it cheers rudi

Hi Scott just found out he was using the the jap reader and that's what got him stumped he can't alter anything or find out the exact problemwoot.gif

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6255993
Share on other sites

Hi Andy No this a different one as last resort ,apparently no info can be read as the car won't allow it.and he had both old and new afm, it's been 6weeks since the last afm pulling my hair out cheers

Why don't you come by my place some time and we can try the Informeter on your car to see what voltage you are getting on your AFM.

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6256026
Share on other sites

1330493082[/url]' post='6256026']

Why don't you come by my place some time and we can try the Informeter on your car to see what voltage you are getting on your AFM.

That would be great if I could let me know when I'm going insane

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6256134
Share on other sites

That would be great if I could let me know when I'm going insane

P.S. I think that Andy's way of asking you out on a date. Watch out if he ask's to meet up on Saturday!

:P

Sorry in advance Andy....could not resist!....was an open window!

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6256174
Share on other sites

^ glad that was all that was open.....

Rudi, if all else fails, why not take it to Nissan and have then put on their Consult?

Both Consult 2 and 3 will plug straight in and read M35 Stagea's, regardless of what some dealerships tell you.

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6257097
Share on other sites

^ glad that was all that was open.....

Rudi, if all else fails, why not take it to Nissan and have then put on their Consult?

Both Consult 2 and 3 will plug straight in and read M35 Stagea's, regardless of what some dealerships tell you.

HOw much would they charge to read a code?

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6257136
Share on other sites

Depends on the dealership, sometimes nothing, sometimes $50 and sometimes they will charge you the hour.

Also depends on the service manager and how much he a) is a dick b) likes the look of your car or c) is interested in your car/problem

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6257145
Share on other sites

1330559226[/url]' post='6257097']

^ glad that was all that was open.....

Rudi, if all else fails, why not take it to Nissan and have then put on their Consult?

Both Consult 2 and 3 will plug straight in and read M35 Stagea's, regardless of what some dealerships tell you.

Yer thanks for that every little bit of info helps I can't keep on buying afm already spent $900 on themcool.gif

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6257250
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...