Jump to content
SAU Community

Arm

Rudi_ARX-TURBO

By Rudi_ARX-TURBO,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Rudi_ARX-TURBO Rising Star

Rudi_ARX-TURBO

Posted
Posted

Hi all here,s my problem my 4th afm died took the car to a import mechanic he says the problem is that when he plugs into the ecu the car will not give any feed back what so ever so he can't find out the exact problem , afm replaced new panel filter car reads 59 degrees thru it but can't be altered Any ideas please it's driving me madworship.gif

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/
Share on other sites
andy65b Veteran

andy65b

Posted
Posted

Hi all here,s my problem my 4th afm died took the car to a import mechanic he says the problem is that when he plugs into the ecu the car will not give any feed back what so ever so he can't find out the exact problem , afm replaced new panel filter car reads 59 degrees thru it but can't be altered Any ideas please it's driving me madworship.gif

Hi Rudi

Was that the same import mechanic that has done all your other work? :whistling:

Have you run an Informeter on your car to see what reeding the car is seeing? That may help to identify what is happening.

Do you know what the specific failure is that is happening to the AFM?

I presume you have tried your faulty AFM on another car to see if it works?

Cheers

Andy

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6255665
Share on other sites
Rudi_ARX-TURBO Rising Star

Rudi_ARX-TURBO

Posted
  • Author
Posted
1330480669[/url]' post='6255665']

Hi Rudi

Was that the same import mechanic that has done all your other work? :whistling:

Have you run an Informeter on your car to see what reeding the car is seeing? That may help to identify what is happening.

Do you know what the specific failure is that is happening to the AFM?

I presume you have tried your faulty AFM on another car to see if it works?

Cheers

Andy

Hi Andy No this a different one as last resort ,apparently no info can be read as the car won't allow it.and he had both old and new afm, it's been 6weeks since the last afm pulling my hair out cheers
Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6255928
Share on other sites
Rudi_ARX-TURBO Rising Star

Rudi_ARX-TURBO

Posted
  • Author
Posted
1330481678[/url]' post='6255702']

Your mechanic is using a reader that doesnt communicate to our Japanese specific OBD2 port. Very few of the cheaper OBD2 readers do.

Hi Scott will find out need all the help last week Craig put a transco kit in don't want part with the car if I can help it cheers rudi

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6255934
Share on other sites
Rudi_ARX-TURBO Rising Star

Rudi_ARX-TURBO

Posted
  • Author
Posted
1330489280[/url]' post='6255934']

Hi Scott will find out need all the help last week Craig put a transco kit in don't want part with the car if I can help it cheers rudi

Hi Scott just found out he was using the the jap reader and that's what got him stumped he can't alter anything or find out the exact problemwoot.gif

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6255993
Share on other sites
andy65b Veteran

andy65b

Posted
Posted

Hi Andy No this a different one as last resort ,apparently no info can be read as the car won't allow it.and he had both old and new afm, it's been 6weeks since the last afm pulling my hair out cheers

Why don't you come by my place some time and we can try the Informeter on your car to see what voltage you are getting on your AFM.

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6256026
Share on other sites
Rudi_ARX-TURBO Rising Star

Rudi_ARX-TURBO

Posted
  • Author
Posted
1330493082[/url]' post='6256026']

Why don't you come by my place some time and we can try the Informeter on your car to see what voltage you are getting on your AFM.

That would be great if I could let me know when I'm going insane

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6256134
Share on other sites
Jetwreck Grand Master

Jetwreck

Posted
Posted

That would be great if I could let me know when I'm going insane

P.S. I think that Andy's way of asking you out on a date. Watch out if he ask's to meet up on Saturday!

:P

Sorry in advance Andy....could not resist!....was an open window!

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6256174
Share on other sites
iamhe77 Grand Master

iamhe77

Posted
Posted

^ glad that was all that was open.....

Rudi, if all else fails, why not take it to Nissan and have then put on their Consult?

Both Consult 2 and 3 will plug straight in and read M35 Stagea's, regardless of what some dealerships tell you.

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6257097
Share on other sites
ironpaw Veteran

ironpaw

Posted
Posted

^ glad that was all that was open.....

Rudi, if all else fails, why not take it to Nissan and have then put on their Consult?

Both Consult 2 and 3 will plug straight in and read M35 Stagea's, regardless of what some dealerships tell you.

HOw much would they charge to read a code?

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6257136
Share on other sites
iamhe77 Grand Master

iamhe77

Posted
Posted

Depends on the dealership, sometimes nothing, sometimes $50 and sometimes they will charge you the hour.

Also depends on the service manager and how much he a) is a dick b) likes the look of your car or c) is interested in your car/problem

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6257145
Share on other sites
Rudi_ARX-TURBO Rising Star

Rudi_ARX-TURBO

Posted
  • Author
Posted
1330559226[/url]' post='6257097']

^ glad that was all that was open.....

Rudi, if all else fails, why not take it to Nissan and have then put on their Consult?

Both Consult 2 and 3 will plug straight in and read M35 Stagea's, regardless of what some dealerships tell you.

Yer thanks for that every little bit of info helps I can't keep on buying afm already spent $900 on themcool.gif

Link to comment
https://www.sau.com.au/forums/topic/393304-arm/#findComment-6257250
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...