Jump to content
SAU Community

Recommended Posts

This tells you what BUT I dont know how to fix

1 Right front wheel speed sensor or circuit

2 Left front wheel speed sensor or circuit

3 Right rear wheel speed sensor or circuit

4 Left rear wheel speed sensor or circuit

5 ABS right front wheel actuator solenoid or circuit

6 ABS front front wheel actuator solenoid or circuit

7 ABS rear wheel actuator solenoid or circuit

8 ABS actuator motor, motor relay or circuit

9 ABS actuator relay or circuit

10 ETS control unit power supply or circuit

11 Fore-and-aft G sensor 1 or circuit

12 Fore-and-aft G sensor 2 or circuit

13 Fore-and-aft G sensor 1, fore-and-aft G sensor 2

14 G sensor power supply 1 or circuit

15 G sensor power supply 2 or circuit

16 Lateral G sensor or circuit

17 Air bleed connector or circuit

18 ETS pressure switch or circuit

19 ETS motor, motor relay or circuit

20 ETS solenoid or circuit

21 Throttle sensor or circuit

22 ETS oil level switch or circuit

The capacitors inside the G-sensor leak and cause the sensor to stuff up. This could save you some money

http://www.skylinesaustralia.com/forums/topic/356654-r32-gtr-g-sensor-fix/

Edited by central coast person
  • 1 year later...
  • 3 months later...

Eats solenoid is located on your attesa pump, which is a over your rear diff, if it's a r32 or next to the fuel tank if r33/34.

In the manual there is a trouble shooting guide that guides t you through fault finding the issue.

  • 1 month later...

Next time it comes on open the boot and count the number of flashes on the Attessa ECU. It will pause and then repeat the flashes.

Once you have the count look up the code earlier in this thread - that should identify the issue and the fix

Edited by Sinista32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...