Jump to content
SAU Community

Recommended Posts

OK it looks like i have just bought one, my questions are going to start. Firstly it is from interstate. Does it have a spare wheel and tyre? space saver or other? secondly how much fuel does the tank hold, how far on average can you go on a tank full. the reason i ask is i may decide to drive it across OZ to WA . ROAD TRIP.

Thanks.

Tony.

Link to comment
https://www.sau.com.au/forums/topic/393379-looks-like-i-have-just-bought-one/
Share on other sites

OK it looks like i have just bought one, my questions are going to start. Firstly it is from interstate. Does it have a spare wheel and tyre? space saver or other? secondly how much fuel does the tank hold, how far on average can you go on a tank full. the reason i ask is i may decide to drive it across OZ to WA . ROAD TRIP.

Thanks.

Tony.

Congratulations on your new R, the 2012 was worth the wait. In all honesty I would employ the services of a car carrying company to bring it over, preferably in a fully enclosed cartainer. No it does not come with a spare wheel, run flats are standard. Tank holds 70 litres, how far you will go on that depends on your right foot. You could get as much as 500kms from a tank but I've seen as less as 140Kms to tank. It's an amazing piece of engineering enjoy it.

Edited by Burger Ring

Congrats on your purchase.

CEVA logistics would be an option if you wanted to get it sent over on the back of a truck.

They can get it on with hydrolics and its in an enclosed box the whole way.

Save the wear and tear, stone chips, added KM - etc.

Another freight option is the RV transport companies like openica logistics.

The Perth caravan show is on soon & lots of trucks will be running across with

vans on. If you can jag one that has 2 small ones on & they have room for a car as well

you might get a good price.

I bought my new R35 from Sydney & drove it back myself to Adelaide.

After having this R35 for 8 months, that is still the best drive I have had in it so far!

Definately got more chips/bugs than if it had been on a truck though!

Decided to drive it back, going to take a couple of days to do it, maybe the coast road NSW and Vic, then a blast accross the nullabour.

Enjoy the drive, I just hope you still have a license when you get back to WA! Watch those aerial patrols, they are the killers. Maybe you should invest in some counter measures before you start your journey.

To save some of the wear and tear -

post-86021-0-88737100-1330599344_thumb.jpg

do you honestly think sticky tape that is thinner than paper will stop stone chips when specifically designed clear bra needs to be around 8mm thick

ossie when I drove to willall in Adelaide I wrapped the entire front and sides with clear bra. I bought the material and lay it down with a mate ourselves, was messy in sections but didn't matter as it came off as soon as I got back

Edited by domino_z

looking at the goop guys they have some stuff you paint on and it sets. the stuff below.

Already have some counter measures.

Yes he had other bids. so we went to 108k

The only issue at the moment is the weather over the east (flooding etc)

http://www.goopguys.com.au/product_details.php?id=9

do you honestly think sticky tape that is thinner than paper will stop stone chips when specifically designed clear bra needs to be around 8mm thick

ossie when I drove to willall in Adelaide I wrapped the entire front and sides with clear bra. I bought the material and lay it down with a mate ourselves, was messy in sections but didn't matter as it came off as soon as I got back

I wouldnt use standard sticky / duct / electrical tape, your right - that wouldnt do anything.

However in the picture I found on google, that looks like cloth tape to me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...