Jump to content
SAU Community

Recommended Posts

the colour is KR4 for ppl who have asked

had a few offers for the box i will sell seperate but only if the engine is sold first so say 1300 for the rb25 with loom ecu and near new clutch, then box price will be... the highest offer :P

i will say $350 for the headlights?

$200 for the front bar with reo/fogs indicators, has slight graze n slight crack in paint but no cracks in the plastic

$300 for bonnet

$80 per gaurd

$120 per bare door

$20 for elec mirrors

i took the side indicators out as it had nissan on the front and now ive seen it has nismo printed on the back :P so $60

front and rear seats (drivers seat has couple small holes and wear on bolster) $200 the lot

$30 each door trim with no elecs

prices might be too much but throw me offers close :P

time for pizza will update stuff later :P

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

just letting everyone know i dont have time to get parts to a courier i will post only small items

gearshift surround/boot SOLD

Centre console SOLD

dash surround vents etc SOLD (i do have another set of perfect centre vents and both side vents i think)

drivers windows switchs SOLD

passenger window switch SOLD (i do have another)

passenger lock reg etc SOLD

passenger window reg SOLD

Speedo sendor SOLD

Edited by shy_s6

lots of msgs coming in but MONEY TALKS :P

will do engine 1200 thats with loom ecu afm and near new clutch, box will be 1300 IF engine sells on its own

or 2300 for the package!!!!!!!!!!

Diff $150

Half shafts $100

door windows $30 each or $50 the pair

Rear wing $100

Parcel shelf $30

will think of more stuff as i see it, if a part isnt listed ask me as its a complete car :P

do you have any suspension gear left? im after some parts from the front right..no idea what its called it, so i will have to look its terminology.

Windscreen SOLD

tail lights LHS the bottom indicator parts is broken look slike it can be swapped over the other in good condition $80 the pair

2 x digi climate control units $40 each

complete hicas unit $30

NEEDS THIS MOTOR?BOX GONE GUYS!!!

carpet looks great $50

Steering wheel has minor wear $100

dash is great condition with passenger air bag $100

drivers window reg n rails $50

drivers locking mech with central locking motor $50

all front panels still available someone is organising frieght but first in with cash wins prefer local for less hassle

mint S2 turbo with braided lines up for sale soon just dbl checking it hasnt been highflowed

as normal anything i havent listed that you need just ask!!

Windscreen SOLD

tail lights LHS the bottom indicator parts is broken look slike it can be swapped over the other in good condition $80 the pair

2 x digi climate control units $40 each

complete hicas unit $30

NEEDS THIS MOTOR?BOX GONE GUYS!!!

carpet looks great $50

Steering wheel has minor wear $100

dash is great condition with passenger air bag $100

drivers window reg n rails $50

drivers locking mech with central locking motor $50

all front panels still available someone is organising frieght but first in with cash wins prefer local for less hassle

mint S2 turbo with braided lines up for sale soon just dbl checking it hasnt been highflowed

as normal anything i havent listed that you need just ask!!

PM sent

radiator SOLD

Cat SOLD

steering column plastics SOLD

the car is non ABS for ppl who asked

does anyone have any crapp 4 studs hubs/knuckles they dont need?? i have someone after the rear set up but want to keep the car rolling

rear brake set up on hold, front disks n calipers available

headlights and front bar NO LONGER ON HOLD someone with you know CASH come get them not ppl umm'in n arggg'ing ffs

also need this runnning gear gone 2200

s2 bb turbo with braided lines 450 or buy with engine package for 2500

stock cooler set up with pipework $70

aircon condensor $80

aircon pump $60

front and rear seats $200 (wear on bolster n couple cig burns on drivers)

door trims good condition but have holes for tweeters $60 pair

Tailights drivers mint, pass clear bit broken $60 the pair

S2 rear wing $100

mint bonnet $300

Gaurds $60 each

Headligths $340

Bare doors $60 each $80 with glass

tailshaft $100

Diff $140

5 stud front hubs $150 (want 4 stud replacemenrt to keep rolling)

stock dump/front with sensor $80

hicas unit complete x2 $40 each

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...